(01.07.2023 21:31)atds писал(а):  

(01.07.2023 21:15)VeraBecker писал(а):  

(01.07.2023 11:00)atds писал(а):  


Here the opening of Skies of Arcadia worked normally.
I used an IDE HDD.
Too bad DreamShell doesn't work when GDemu is connected to dreamcast. From what I've read it's GDemu's fault for DreamShell not working with GDemu installed.
Thank you for your work.

Hello,

You can connect GDEMU with HDD or CF MOD, in this video they explain it but it is in Spanish, there the diagram shows at minute 7:44.

https://youtu.be/y7MGcUnl2Tw

Greetings

Thanks for the video.
My native language is Portuguese, so even though the video is in Spanish, I can understand almost everything, as both languages are similar.

(30.06.2023 16:39)tanchik писал(а):  Добрый день.

В версии 0.8 Beta был исправлен данный баг: http://www.dc-swat.ru/forum/thread-3525-post-42471.html#pid42471 ?
Если нет, то планируется ли исправление в будущем?

(02.08.2023 11:11)fafadou писал(а):  Hi @Swat, if I understand well, you have done the maximum you could in the last release.

Do you still need some tests ?
I have my CF stuff now.

(02.08.2023 18:30)fafadou писал(а):  I must confess i did the same
Testing may be boring After a while, not much as build the loader when you are out if ideas, i Guess.
And it looks you did your best last time. Thank you very much again.

(02.08.2023 18:30)fafadou писал(а):  I'll try some things, maybe if a New gcc is released it will be quite easy to do a New build ?

(04.08.2023 03:46)fafadou писал(а):  Nakuroru runs well with default preset with ssd.

I try to use my CF but it's not detected during boot. I try to move the jumper but no luck.
Do you have any idea about what happening ?

(07.08.2023 08:33)fafadou писал(а):  Hi,

This my stuff :
https://drive.google.com/file/d/1n3PyhXx8BFoCCtdKsivUSEJpXdrah5YK/view?usp=sharing

Do you think I should change my sd card brand ?
The jumper is actually good ?

With dreamshell RC4, we can't use the red sd to CF adapter for wince games. Is it the same with RC5 ?

Thanks for your help.

(08.08.2023 07:36)SWAT писал(а):  

(07.08.2023 08:33)fafadou писал(а):  Hi,

This my stuff :
https://drive.google.com/file/d/1n3PyhXx8BFoCCtdKsivUSEJpXdrah5YK/view?usp=sharing

Do you think I should change my sd card brand ?
The jumper is actually good ?

With dreamshell RC4, we can't use the red sd to CF adapter for wince games. Is it the same with RC5 ?

Thanks for your help.

I just do not trust such converters and cards from unknown manufacturers and don't test with them. It turns out two bridges with some quality between storage and interface, so this work can be unpredictable. All this negatively affects the work to some extent.
Original CF card is the best choice in my opinion. It's the fastest, compact and stable device for DC.

(09.08.2023 03:09)fafadou писал(а):  Thank you I'll buy a true CF card

(09.08.2023 23:16)megavolt85 писал(а):  this buffer contains a compiled program, to run it, you need to declare a function prototype and assign it the address of the buffer with the program

(10.08.2023 02:53)megavolt85 писал(а):  Ubuntu, geany and terminal

(10.08.2023 01:22)VeraBecker писал(а):  What development IDE and operating system do you use to edit and compile the dreamshell source code?

(10.08.2023 07:36)SWAT писал(а):  

(10.08.2023 01:22)VeraBecker писал(а):  What development IDE and operating system do you use to edit and compile the dreamshell source code?

DreamShell repository have settings for Visual Studio Code it's cross platform application. I use macOS last years, before used Linux Mint. You can use any system and also windows with some emulations, but better use *nix because build manual for it.