DC-SWAT Forum
RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD - Версия для печати

+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: DreamShell (/forum-3.html)
+--- Форум: General Discussion (/forum-27.html)
+--- Тема: RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD (/thread-4097.html)

Страниц: 1 2 3

RE: RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD - fafadou - 26.08.2024 00:27

(23.08.2024 04:18)miguelmarrero72 писал(а):  I am using 471 which is 470pf 0.47nf and I have pin 1 connected. You have 3 test modes 1 without capacitor 2 with capacitor 3 without connecting pin 1 wire

With pin 1 and pin 1 with capacitor, I have a freeze after the dreamshell music before the desktop screen appear.

Without pin 1, the system ask me where it should load dreamshell from cd or sd card, the ssd is not found...

Maybe it's due to my ide cable too long, or the brand of my ssd, I have a samsung instead of a crucial.

RE: RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD - aldair - 26.08.2024 01:52

(26.08.2024 00:27)fafadou писал(а):  
(23.08.2024 04:18)miguelmarrero72 писал(а):  I am using 471 which is 470pf 0.47nf and I have pin 1 connected. You have 3 test modes 1 without capacitor 2 with capacitor 3 without connecting pin 1 wire

With pin 1 and pin 1 with capacitor, I have a freeze after the dreamshell music before the desktop screen appear.

Without pin 1, the system ask me where it should load dreamshell from cd or sd card, the ssd is not found...

Maybe it's due to my ide cable too long, or the brand of my ssd, I have a samsung instead of a crucial.
You need to solder the capacitor by making a jumper on pin 1 and pin 2.



[Изображение: m0aFva0h.png]

https://i.imgur.com/m0aFva0.png

RE: RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD - miguelmarrero72 - 26.08.2024 03:06

(26.08.2024 00:27)fafadou писал(а):  
(23.08.2024 04:18)miguelmarrero72 писал(а):  I am using 471 which is 470pf 0.47nf and I have pin 1 connected. You have 3 test modes 1 without capacitor 2 with capacitor 3 without connecting pin 1 wire

With pin 1 and pin 1 with capacitor, I have a freeze after the dreamshell music before the desktop screen appear.

Without pin 1, the system ask me where it should load dreamshell from cd or sd card, the ssd is not found...

Maybe it's due to my ide cable too long, or the brand of my ssd, I have a samsung instead of a crucial.
It may be the cable but that adapter works with pin one on and the capacitor is 1 to 2. Try using an IDE ATA 133 cable. Try directly with an IDE HDD and discard the cable. and put the capacitor as close to the adapter as possible
(26.08.2024 01:52)aldair писал(а):  
(26.08.2024 00:27)fafadou писал(а):  
(23.08.2024 04:18)miguelmarrero72 писал(а):  I am using 471 which is 470pf 0.47nf and I have pin 1 connected. You have 3 test modes 1 without capacitor 2 with capacitor 3 without connecting pin 1 wire

With pin 1 and pin 1 with capacitor, I have a freeze after the dreamshell music before the desktop screen appear.

Without pin 1, the system ask me where it should load dreamshell from cd or sd card, the ssd is not found...

Maybe it's due to my ide cable too long, or the brand of my ssd, I have a samsung instead of a crucial.
You need to solder the capacitor by making a jumper on pin 1 and pin 2.



[Изображение: m0aFva0h.png]

https://i.imgur.com/m0aFva0.png

With this adapter, the capacitor 1 is used to 2 but without the cable 1 connected to the console. In my case, with the Startech brand, it works perfectly.

RE: RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD - miguelmarrero72 - 26.08.2024 03:34

[Изображение: photo-2024-08-06-09-29-24-3.png]

RE: RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD - miguelmarrero72 - 04.10.2024 03:12

(25.07.2024 22:37)megavolt85 писал(а):  
(25.07.2024 20:26)sergey2007 писал(а):  На каком контроллере построен адаптер?

Marvell 88sa8052

megavolt 85 you will have there the datasheet of this Marvell 88sa8052. to make the adapter for dreamcast and share

RE: RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD - megavolt85 - 06.10.2024 23:13

(04.10.2024 03:12)miguelmarrero72 писал(а):  megavolt 85 you will have there the datasheet of this Marvell 88sa8052. to make the adapter for dreamcast and share


no, I don't have it, moreover, I tried many SATA adapters and none of them worked well for me, that's why I use only IDE HDD and I advise everyone to use only native IDE

RE: RetroDream Compatibilities with Dreamcast VA0-VA1 RUS-US-PAL-JP HDD-SSD - cocori002 - 09.10.2024 16:48

Finally worked with this pack:

3.SATA Плата-адаптер с подключением в системную плату Dreamcast. Подключается заместо GDrom и не требует установки кристалла для синхронизации звука. Работает по дефолту и без необходимости стороннего вмешательства. Подходит для ревизий VA0 или VA1 (Тестировались 3 платы купленные у трех разных продавцов).
http://www.dc-swat.ru/forum/attachment.php?aid=1374

IV. Использовалась следующая сборка:
Retrodream v3.0.0 + DreamShell 4.0.0 Release https://drive.google.com/file/d/1lAVVFJR...drive_link


Thank you!