+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: Sega Dreamcast (/forum-2.html)
+--- Форум: English section (/forum-29.html)
+--- Тема: Compatibility Dreamcast Japan Problem (/thread-2007.html)
Compatibility Dreamcast Japan Problem - swordeye - 13.03.2013 18:34
HELP! I have properly burned a dreamshell rc1 but doesn't work with my dreamcast NTSC-J console! Also, I have problems with the sd mod to serial pinout, where should i solder the ground in the dreamcast? Your help would be of great help!
Sir SWAT I need your help badly please....
please thank you very much!
RE: Compatibility Dreamcast Japan Problem - SWAT - 14.03.2013 09:57
Try first beta 4.
RE: Compatibility Dreamcast Japan Problem - swordeye - 17.03.2013 20:48
(14.03.2013 09:57)SWAT писал(а): Try first beta 4.
"sir swat thanks for the advice...please pardon me but I still have to more questions if you dont mind:
1. in the sd card serial pinout, where will I solder the ground? is it in the dreamcast motherboard or somewhere else?
2. if I use the sd form dshell beta 4 cd,will it load the dshell sd form rc 1 in the card reader?
thanks in advance for the answer!
RE: Compatibility Dreamcast Japan Problem - SWAT - 18.03.2013 15:10
1. Any ground on the motherboard.
2. It makes no sense. If RC1 does not work, then you will only replace by a jumper the resistor RA601 from the motherboard for fixing this. Or connect direct to test points before resistor http://yam.20to4.net/dreamcast/va1.html
RE: Compatibility Dreamcast Japan Problem - elpedromolina04 - 08.07.2016 05:06
hello swat! in some Japanese dreamcast not boot dreamshell, why can this be?
not read the disc, the dreamshell cd copy, read only original CDs, not read copys
RE: Compatibility Dreamcast Japan Problem - megavolt85 - 08.07.2016 05:11
only BIOS mod. Bios need flash on programmator or another console
RE: Compatibility Dreamcast Japan Problem - SWAT - 08.07.2016 09:12
Your DC with disabled Mil-cd in BIOS? What a revision of motherboard?