+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: DreamShell (/forum-3.html)
+--- Форум: General Discussion (/forum-27.html)
+--- Тема: ide device not loaded. (/thread-2581.html)
Страниц: 1 2
ide device not loaded. - news8019 - 20.03.2017 22:59
I have a problem with mod.IDE to my dream. I think the connections are welded well, because he says that identifies a device. the problem and who do not want to recognize, but do not understand the problem.
Post a picture of the starting dreamshell to better understand the problem.
Thank you for the answer.
RE: ide device not loaded. - Gillbert - 21.03.2017 00:17
Are you pretty sure that you soldered every wire in the correct points?
Post some pics of your mod, please.
RE: ide device not loaded. - news8019 - 21.03.2017 01:18
Thank you for the reply. I enclose a photo, I hope to see well.
RE: ide device not loaded. - Gillbert - 21.03.2017 01:29
It seems fine as far I can see.
But I could not see where the end of the wires are connected to. Did you wired them to an IDE connector? Are you using some SATA adapter? More details.
RE: ide device not loaded. - SWAT - 21.03.2017 07:13
What IDE devce? Try another and without *smart* adapters.
RE: ide device not loaded. - news8019 - 21.03.2017 11:26
you, use an SD adapter, I just purchased a hd that arrives in a few days.
It is the version with 44 pins with hd 2.5
RE: ide device not loaded. - SWAT - 21.03.2017 14:43
Problem in adapter.
RE: ide device not loaded. - news8019 - 21.03.2017 15:58
sure? so with a true hd I solve my problem.
I update the discussion, just get me the hard drive
RE: ide device not loaded. - megavolt85 - 21.03.2017 18:05
SD2IDE don't work with dreamcast
RE: ide device not loaded. - news8019 - 21.03.2017 21:39
I hope with all my heart is that the problem
Thanks for all the answers
RE: ide device not loaded. - Gillbert - 22.03.2017 00:02
Problem with that adapter is because there is no jumper to change to SLAVE mode.
RE: ide device not loaded. - SWAT - 22.03.2017 10:28
(21.03.2017 18:05)megavolt85 писал(а): SD2IDE don't work with dreamcast
Some works, some not.
RE: ide device not loaded. - news8019 - 22.03.2017 17:01
Arrived now the hard disk, do not boot from HD, and even from sd.
RE: ide device not loaded. - megavolt85 - 22.03.2017 22:20
you use 80 wire ide cable?
RE: ide device not loaded. - news8019 - 22.03.2017 22:31
No, of course not. 44 wires
RE: ide device not loaded. - megavolt85 - 22.03.2017 22:37
gdrom install'ed?
RE: ide device not loaded. - news8019 - 22.03.2017 22:40
gd-rom is installed, and the console is assembled.
RE: ide device not loaded. - megavolt85 - 22.03.2017 22:57
i look on photo error when driver set DMA mode
need photo your G1ATA mod
RE: ide device not loaded. - news8019 - 22.03.2017 23:51
Now I do not have on hand, I can just upgrade to photograph the area G1ATA
RE: ide device not loaded. - Gillbert - 23.03.2017 00:15
Did you wired the pin 44 to Ground? If not, do it, pin 44 must be in low state.