Building SDcard - Версия для печати

Building SDcard - Версия для печати

+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: Sega Dreamcast (/forum-2.html)
+--- Форум: General Discussion (/forum-7.html)
+--- Тема: Building SDcard (/thread-3605.html)

Building SDcard - EduardoKmus - 17.07.2019 13:37

Hello friends, I am going to try to build an sd adapter to connect it to the serial port in an external way, so far I have always used this mod internally eliminating the resistance "R620" of the main board. I want to know if it is possible to build an SDcard without removing any component from the main card and using only an SD to microSD adapter? regards.

RE: Building SDcard - aldair - 23.07.2019 17:19

(17.07.2019 13:37)EduardoKmus писал(а): Hello friends, I am going to try to build an sd adapter to connect it to the serial port in an external way, so far I have always used this mod internally eliminating the resistance "R620" of the main board. I want to know if it is possible to build an SDcard without removing any component from the main card and using only an SD to microSD adapter? regards.

https://i.imgur.com/PODv7Sa.jpg
[Изображение: nBjQxy9m.jpg]

https://i.imgur.com/nBjQxy9.jpg

RE: Building SDcard - chth96 - 21.01.2025 09:35

(23.07.2019 17:19)aldair писал(а):
(17.07.2019 13:37)EduardoKmus писал(а): Hello friends, I am going to try to build an sd adapter to connect it to the serial port in an external way, so far I have always used this mod internally eliminating the resistance "R620" of the main board. I want to know if it is possible to build an SDcard without removing any component from the main card and using only an SD to microSD adapter? regards.

https://i.imgur.com/PODv7Sa.jpg

https://i.imgur.com/nBjQxy9.jpg

hello.
I finally strip off pci slot from broken mainboard like below screenshot.
[Изображение: RTFWwvR.jpeg]

But How can I build an sd adapter for dreamcast with this pci slot?

RE: Building SDcard - ands - 21.01.2025 20:10

(21.01.2025 09:35)chth96 писал(а): But How can I build an sd adapter for dreamcast with this pci slot?

Hi !
you take this socket and cut it off as in the photo along the orange lines, so that you get a rectangle with 10 holes, insert the slats from the socket into them, these will be the contacts.