Cannot load SD with RC2 or RC1

[polyfusion]

No, I was just wondering. I can always switch back to the original BIOS if I need to do that.

With my current setup, the GD-ROM is still in there, but I'm planning on connecting up a CF card interface through the GD-ROM board (laser assembly removed).

My thinking is that it would be easier, and more easily transferable to another DC if necessary, to have the CF setup bolted to the GD-ROM chassis. I just needed to know and verify that *I* can boot DS from an SD card before going ahead with the CF setup.

I've also since read (if I read correctly) that the new BIOS can boot from the DS folder on HDD, so presume it should be possible from CF as well. That would probably be the final stage for me.

Thanks for all your work on this. Great to see such a great console still getting the attention it deserves.