ISO Loader 0.7.x Beta

[dragoncity]

Ok so you are in USA... jumper is just for "correct" screen in RGB.

So you are not in PAL config but NTSC again

[MilkeyWilkey]

(19.02.2019 13:04)dragoncity писал(а):  Ok so you are in USA... jumper is just for "correct" screen in RGB.

So you are not in PAL config but NTSC again

it works in composite too. anyway, there is little point in having it not in usa if you have compatible tv since it runs games of any region and corrects screen proportions and speed of games that don't let you switch to 60 Hz.

[dragoncity]

I use VGA (Or Akura HDMI),so I am in 60Hz too

I will mod an console in NTSC and USA for test...

[dragoncity]

Can you still share your DS folder with me that I am EXACTLY in the same conditions during my tests please?

And what memory you use etc...?

[dragoncity]

So I changed Region for USA > NTSC > French

SAME PROBLEM ! My god...

I tested in SATA ... CF... IDE....with G1-ATA..with GDROM... game don't boot blackscreen ! So what's your config !!! o_O

[MilkeyWilkey]

sure. address is 8C004000. loader device 8. boot from HDD. https://dropmefiles.com/a8Dck

[dragoncity]

Ok thank you,but same problem ^^

It's crazy...blackscreen...

---

I tested also with GDROM + GD-IDE and SEGA BIOS... same problem. (no SD)

Hum..can you share the GDI? Maybe the release...I test everything ^^

[MilkeyWilkey]

it's from TOSEC. I can PM you a link. it's on rutracker.org
do you have any output before game starts? be sure to set loader device to 8 with my DS folder

[dragoncity]

Yes all other games work with SYNC8 and 004000.

Just NBA...Ooga booga..and floigan bros.

[dragoncity]

Ok thanx..but same problem so not the GDI... !

[fafadou]

Very bad luck...
So we need to patch the ip.bin ?

is it the Pal version of Floigan brother you have try ? Idem for 2k sports game ?


@swat : it's good to see you here again, don't hesitate to tell us more about this new loader. Have you work together ? Have you receive the stuff you are waiting for ? What do you want to do with ?


What do you plan for finish this new fantastic beta ?
Do you plan to do a version of 0.7.x without dma ? for the very last reluctant games.
What do you think about gcc 8.2 using for this new loader ? Do you think it's a good idea to build a 0.6.1_gcc8.2 in order to see the differences with cdda ?

It's not request just curiosity ^^ thanks for all you done you two :-D

[dragoncity]

92% of game work. (389 games tested)

http://dreamshell.infos.st/

I upload my last DS with last beta 0.7x :
8.bin > 0.7.x_OPT-Only_noCDDA

For use with SATA or if your IDE don't boot,you need an SD MOD.

As a reminder, the SD MOD is also a more stable system and the presets work.

And for work the loader redirect IGR,you NEED to create this folder in your HDD :
IGR\DS_CORE.BIN

Try and tell me if Ooga Booga work

[megavolt85]

dragoncity i'm check many variants and have same problem only if i'm use external power supply for my HDD

[dragoncity]

(19.02.2019 17:46)megavolt85 писал(а):  dragoncity i'm check many variants and have same problem only if i'm use external power supply for my HDD

Interesting.

The CF card and the SSD hard disk are powered directly by the 5V console.

What's really weird is that the other games I have no worries, on the contrary they work very well.

[megavolt85]

(19.02.2019 16:46)fafadou писал(а):  Do you plan to do a version of 0.7.x without dma ?

no, it's low level emulation, all read function work as in original syscalls

(19.02.2019 16:46)fafadou писал(а):  What do you think about gcc 8.2 using for this new loader ?

i'm use stable 5.2.0

[MilkeyWilkey]

(19.02.2019 17:19)dragoncity писал(а):  And for work the loader redirect IGR,you NEED to create this folder in your HDD :
IGR\DS_CORE.BIN

what is it for?

[dragoncity]

For use with SATA or if your IDE don't boot,you need an SD MOD.

As a reminder, the SD MOD is also a more stable system and the presets work.

And for work the loader redirect IGR,you NEED to create this folder in your HDD :
IGR\DS_CORE.BIN

It's an OTHER loader 0.7x for put DS_CORE in other folder in HDD.

[megavolt85]

dragoncity you have CF, SATA or IDE device boted DS directly without SD?

[dragoncity]

I tested all config like I said before

G1-ATA
MOD SD + CF/IDE/SSD

GD-IDE
CF/IDE/SSD

GD-IDE "without ds bios,so with sega bios"
CF/IDE/SSD

SAME PROBLEM

---

I don't understand why you can't load directly DS_CORE.BIN from SD...so where there is DS folder.

[megavolt85]

you can boot DreamShell without SD card?