+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: DreamShell (/forum-3.html)
+--- Форум: General Discussion (/forum-27.html)
+--- Тема: ISO Loader 0.7.x Beta (/thread-3525.html)
RE: ISO Loader 0.7.x Beta - fafadou - 26.05.2020 11:09
Did you try to run them with loader 0.6.1_gcc_7.1 ?
In order to play them with 0.7.x I repack them in gdi from original GDI dump and original IP.BIN. I replace datas and finally binhack the start lba to 45000 in 1ST_READ.BIN.
Napple tale is running well like this.
Here mine :
http://www.mediafire.com/file/i3606pugx8u2gui/Napple_tale_english_gdi.zip/file
RE: ISO Loader 0.7.x Beta - Zychion - 26.05.2020 18:00
I'm downloading your copy of Napple Tale as we speak. If I get it working I may just give what you suggested a try.
RE: ISO Loader 0.7.x Beta - Zychion - 27.05.2020 07:06
In order to play them with 0.7.x I repack them in gdi from original GDI dump and original IP.BIN. I replace datas and finally binhack the start lba to 45000 in 1ST_READ.BIN.
What do you use to repack the GDI? As I understand, you need to bundle it all back in to a Bin file and then alter the TOC that is the GDI file in case the track size has changed.
RE: ISO Loader 0.7.x Beta - fafadou - 27.05.2020 14:04
I use GDI BUILDER.
I extract the datas with gdi explorer. you can use it for cdi too.
RE: ISO Loader 0.7.x Beta - Zychion - 27.05.2020 15:06
Sweet. Found GDI builder and I think I have it working in most cases. They are working on Demul but I'm yet to test them on hardware. My initial fault was that I thought you had to modify IP.BIN as well but you have to leave that unmodified.
RE: ISO Loader 0.7.x Beta - Zychion - 05.06.2020 20:26
Hey Megavolt,
Ian Michael just uploaded a new up to date version of Cave Story with all it's CDDA tracks;
https://mega.nz/#!j2pnhYoR!BvDybg_JRaw7uK9hsuZPjd94mq-BePJbm-H4dhQyVY4
Is it possible for you to convert this in to a GDI?
Edit - Sorry. I didn't even think about that when I saw the new CDI uploaded. Thank you for replying though.
RE: ISO Loader 0.7.x Beta - megavolt85 - 05.06.2020 20:56
CDDA tracks don't supported on 0.7.0
RE: ISO Loader 0.7.x Beta - cryptblood1986 - 15.06.2020 11:37
https://imgur.com/a/pfVhZih
Question megavolt,
it is safe to leave on the region changer wire? Or I should remove it after changing region?
I am using the correct f1610 for the va0.
Am also using L160 for the va1 doing the same mod.
I've tested 40 hrs on each unit. Not having problems. Some forums online are saying to remove this region changer wire.
RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 15.06.2020 16:22
(15.06.2020 11:37)cryptblood1986 писал(а): https://imgur.com/a/pfVhZih
Question megavolt,
it is safe to leave on the region changer wire? Or I should remove it after changing region?
I am using the correct f1610 for the va0.
Am also using L160 for the va1 doing the same mod.
I've tested 40 hrs on each unit. Not having problems. Some forums online are saying to remove this region changer wire.
there where reports that leaving it connected eventually burn out the flash chip
RE: ISO Loader 0.7.x Beta - fafadou - 15.06.2020 17:51
(17.04.2020 16:49)megavolt85 писал(а): I am working on another project
@Megavolt85 : We leave you quiet since a while. I confess I can't resist anymore to ask you what you are working about ?
If this project progress run well as you planned ?
Perhaps the good time to tease is coming. If you want.
Of course I hope you are well, it's the most important thing.
RE: ISO Loader 0.7.x Beta - cryptblood1986 - 15.06.2020 17:53
(15.06.2020 16:22)MilkeyWilkey писал(а):(15.06.2020 11:37)cryptblood1986 писал(а): https://imgur.com/a/pfVhZih
Question megavolt,
it is safe to leave on the region changer wire? Or I should remove it after changing region?
I am using the correct f1610 for the va0.
Am also using L160 for the va1 doing the same mod.
I've tested 40 hrs on each unit. Not having problems. Some forums online are saying to remove this region changer wire.
there where reports that leaving it connected eventually burn out the flash chip
Yes I'm aware. Though I noticed some of the ones reporting that were using the wrong flash chips on the va0 models.
RE: ISO Loader 0.7.x Beta - megavolt85 - 15.06.2020 23:10
(15.06.2020 11:37)cryptblood1986 писал(а): it is safe to leave on the region changer wire?
no, it's don't safe
need connect 12V only when you write chip
(15.06.2020 17:51)fafadou писал(а): @Megavolt85 : We leave you quiet since a while. I confess I can't resist anymore to ask you what you are working about ?
https://vk.com/video334341769_456239100
it's adapter for connect PS/2 keyboard, mouse and PlayStation 1/2, Saturn, MegaDrive controllers to Dreamcast
adapter emulate VMU 16 banks, each bank can be ulocked to 241 block
you can buy now STM32F103C8T6, M25PE16 and connectors
RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 16.06.2020 10:08
OMG this is exactly what I needed. Is software ready? I can imagine connectors would be the priciest part of it
RE: ISO Loader 0.7.x Beta - fafadou - 16.06.2020 12:06
@megavolt85 : I thought you were working on a game but it's about stuff.
So impressed, brilliant...
I have some questions, like analog twin stick compatibility but I'll ask you later.
I let you work pleasantly :-D
Thanks for answering.
RE: ISO Loader 0.7.x Beta - megavolt85 - 16.06.2020 14:00
(16.06.2020 10:08)MilkeyWilkey писал(а): Is software ready?
Saturn, PlayStation, mice, keyboard, VMU, vibro for PSX alredy work
need write MegaDrive and USB for read/write internal VMU
(16.06.2020 12:06)fafadou писал(а): I have some questions, like analog twin stick compatibility
PSX have two mode:
1) standart pad -
Код:
DC PS
A X
B O
X []
Y /\
Start start
d-pad1 d-pad
L L2
R R2
Analog1 Left stick2) all button
Код:
DC PS
A X
B O
C R1
D select
X []
Y /\
Z L1
Start start
d-pad1 d-pad
L L2
R R2
Analog1 Left stick
Analog2 Right stick
d-pad2 up L3
d-pad2 down R3in Q3 arena and Unreal Tournament second mode work fantastic, need test more games
Saturn too have two mode, standart and all button
in all button controller detect as ASCII pad, but (not all) games can use L and R buttons too
RE: ISO Loader 0.7.x Beta - MilkeyWilkey - 16.06.2020 14:18
(16.06.2020 14:00)megavolt85 писал(а): in Q3 arena and Unreal Tournament second mode work fantastic, need test more games
Is second analog stick bindable? I thought about editing the game/VMU save file to add support for second analog stick and making dualstick controller prototype, but realized now that the game probably has it's own console like PC version that would allow to bind it on the fly
RE: ISO Loader 0.7.x Beta - megavolt85 - 16.06.2020 15:33
not all games support full functional
Unreal Tournament suppport both analog, but not all button
Q3 arena support all on PSX controller
RE: ISO Loader 0.7.x Beta - segatxdc - 13.07.2020 06:52
Some games in the 0.7.0 B1 output for PAL run, 50 hz in B2 version of the same game or cannot be loaded, don't know is what reason.
RE: ISO Loader 0.7.x Beta - Ro Magnus Larsson - 13.07.2020 07:07
Hi: Anyone could make "Floigan Bros. Episode I" work in Dreamshell IDE?
I have found a failure in 18 Wheeler: American pro Trucker, I tested it in CDI (US), in GDI OPT (US) and GDI OPT (Eu) and all versions freezes in the 4th stage playing "Arcade" mode, anyone played it this game ?
maybe I have wrong presets ? I put those of Dragoncity last list
RE: ISO Loader 0.7.x Beta - fafadou - 14.07.2020 03:36
Did you have try the game in opt format with 0.7.x loaders ?
Maybe it's the same issue than skies of arcadia intro...