Suggestions (предложения)

[dragoncity]

What is your message SWAT? I received a notification ^^

So..the problem with the SATA..it's the adaptors...and it blocks after detection of hard disk ! (very boring !!)

I tested 8 SAME adaptors sata..and 4 works..and 4 doesn't work !!

The problem is the GROUND..BAD SOLDER !!

I spoke in my video,but it's in french sorry







Sometimes it's more,you must check ALL solder !!

I hope my test can be help you...

[aldair]

(05.12.2016 16:34)dragoncity писал(а):  What is your message SWAT? I received a notification ^^

So..the problem with the SATA..it's the adaptors...and it blocks after detection of hard disk ! (very boring !!)

I tested 8 SAME adaptors sata..and 4 works..and 4 doesn't work !!

The problem is the GROUND..BAD SOLDER !!

I spoke in my video,but it's in french sorry







Sometimes it's more,you must check ALL solder !!

I hope my test can be help you...

It does not work with large wires.

look here; http://www.dc-swat.ru/forum/thread-2522.html

[megavolt85]

hi gays. need test this kernel.
added: sort files by alphabetical (folders always top)

[dragoncity]

(05.12.2016 20:57)megavolt85 писал(а):  need test this kernel.
added: sort files by name (folders always top)

I can test if you want

It's for more compatibility with adaptor sata?

[somacast]

(05.12.2016 18:01)aldair писал(а):  

(05.12.2016 16:34)dragoncity писал(а):  What is your message SWAT? I received a notification ^^

So..the problem with the SATA..it's the adaptors...and it blocks after detection of hard disk ! (very boring !!)

I tested 8 SAME adaptors sata..and 4 works..and 4 doesn't work !!

The problem is the GROUND..BAD SOLDER !!

I spoke in my video,but it's in french sorry







Sometimes it's more,you must check ALL solder !!

I hope my test can be help you...

It does not work with large wires.

look here; http://www.dc-swat.ru/forum/thread-2522.html

thnx alot aldair for posting the photos of my mod, in fact I would have never succeeded without your tutorials & answers.

i also had many unsuccessful attempts, but the best way is to connect the adapter directly to the board, use a thick wire (really thick) for both ground connections on the ends, and even the wires between the points and the adapter needs to be thicker than usual small dia wires used in modchips etc.

another thing is you need to be really careful with the solder points on the adapter as its usually cheap quality and tends to get destroyed.

also I have not removed the sata socket as you can see from the adapter as I removed the metalic shell under the dc motherboard so it fits without a problem, then you can use male-female ends sata cable and route it to where ever you need

power required by the adapter is just 1 point 5v, the other is 12 v.

i hope this helps

[megavolt85]

(05.12.2016 20:59)dragoncity писал(а):  I can test if you want

nice

(05.12.2016 20:59)dragoncity писал(а):  It's for more compatibility with adaptor sata?

no, it's for sort files by alphabetical in ISO Loader , File Manager, etc....

[dragoncity]

(05.12.2016 21:05)megavolt85 писал(а):  

(05.12.2016 20:59)dragoncity писал(а):  I can test if you want

nice

(05.12.2016 20:59)dragoncity писал(а):  It's for more compatibility with adaptor sata?

no, it's for sort files by name in ISO Loader , File Manager, etc....

Ok I test now,I like new update

---

WORKS !!! files by name in ISO Loader

---

VERY GOOD JOB Megavolt !!!

[dragoncity]

Next step,if you can hide "Recycle.bin" and "System Volume Information" in Iso_Loader

[megavolt85]

next step.... enjoy

[Zimada]

(05.12.2016 21:29)megavolt85 писал(а):   next step.... enjoy

THX! by the way... Have news about "Holly" protection?

И не много по русский: (я хоть дупля и не режу в кодинге но все же хотел бы спросить) Как у вас дела обстоят с хоули протекшеном? По всему видно что вы с МиталиКом накопали что то безумно интересное но вот это "что то" нужно ломать... Можно хотя бы в общих чертах, либо сюда, либо в личку?

[dragoncity]

(05.12.2016 21:29)megavolt85 писал(а):   next step.... enjoy

Enjoy..I said that all the time in my website ^^

So it's not very perfect this time ^^

There is again "recycle.bin"

---

I think there is an escape before the name like that

" RECYCLE.BIN"

[megavolt85]

(05.12.2016 21:44)Zimada писал(а):  Как у вас дела обстоят с хоули протекшеном? По всему видно что вы с МиталиКом накопали что то безумно интересное но вот это "что то" нужно ломать... Можно хотя бы в общих чертах, либо сюда, либо в личку?

пока топчемся на месте, я переделал свой дрим под брутилку и потихоньку уменьшаю размер бинарика проходящего проверку, на данный момент это 530 байт. Если получится уменьшить хотябы до 32-х байт будет проще понять что там за алгоритм

(05.12.2016 21:48)dragoncity писал(а):  There is again "recycle.bin"

---

I think there is an escape before the name like that

" RECYCLE.BIN"

"recycle.bin" or "Recycle.bin" or "RECYCLE.BIN" ?

[dragoncity]

On my computer it's "Corbeille"..I am french.

But in iso_loader it's "RECYCLE.BIN"

[megavolt85]

all inclusive
"RECYCLER" - windows xp
"$RECYCLE.BIN" - windows vista and greater
"System Volume Information"

[dragoncity]

Perfect !! VERY GOOD JOB !!
It's very clean now !!

Next step...Shenmue 1

[Gillbert]

Thanks for the update Megavolt! I'll test it soon.

[aldair]

[dragoncity]

Now it's perfect,very clean,this is my Dreamcast Dreamshell.

Many directory for be clean,and not more 9 folders or games

A thank you at the beginning

[dragoncity]

Is-it possible to scroll with "Directional pad" in Iso_Loader..?



Because with Analog,this is not practical, besides we see in my previous video.

Thank you

[megavolt85]

(07.12.2016 02:07)dragoncity писал(а):  Because with Analog,this is not practical, besides we see in my previous video.

why? X+Analog it's simple