Dreamcast GDI Compatibility List

[aldair]

(19.04.2016 00:41)megavolt85 писал(а):  I have one hdd 3.5 40gb lba28 , DS don't work with this hdd, may be problem with lba28.
All hdd with lba48 work fine

The hdd sata and ide with nogdrom bios only works if the sd card is in fat16 and does not work with ide with lb28.

[dragoncity]

I updated my list,I prefer know the games works like an original Gdrom or better

Compatibility List Dreamshell RC4 By DragonCity

So 3 colors,
Green : Works Perfectly !
Orange : Some problem,doesn't work with CDDA..freeze in options menu...etc..
Red : Doesn't Work.. :/

@aldair
Your pcb here :
https://www.facebook.com/Dreamshell2016/...9426063313

Which games have audio problem for add an crystal?
And it's with CDDA?

And what you use "boot_loader_devkit_nogdrom.bios" ..?
Because it's not necessary,you have the pcb of gdrom.. so use "boot_loader_devkit.bios"

Sorry but I don't understand what you do ^^

[aldair]

@aldair
Your pcb here :
https://www.facebook.com/Dreamshell2016/...9426063313

Which games have audio problem for add an crystal?
And it's with CDDA?

[/quote]




boot_loader_retail_nogdrom

[dragoncity]

Why you use the bios "no_gdrom"?
Because you use the gdrom card... I don't understand...

Can you explain?

[aldair]

(14.09.2017 20:21)dragoncity писал(а):  Why you use the bios "no_gdrom"?
Because you use the gdrom card... I don't understand...

Can you explain?

I want to use without pcb of GD-ROM.

[dragoncity]

... if someone understand please write me the answer...

[aldair]

(14.09.2017 21:13)dragoncity писал(а):  ... if someone understand please write me the answer...

What is the purpose of bios nogdrom?

[dragoncity]

This is with "no gdrom" so use no_gdrom bios.
But YOU use the pcb of gdrom,so this is the gdrom... so use the "normal" bios and not the "no-gdrom" bios.

You understand? DON'T USE NO_GDROM BIOS when you use the pcb gdrom!

[aldair]

(14.09.2017 21:21)dragoncity писал(а):  This is with "no gdrom" so use no_gdrom bios.
But YOU use the pcb of gdrom,so this is the gdrom... so use the "normal" bios and not the "no-gdrom" bios.

You understand? DON'T USE NO_GDROM BIOS when you use the pcb gdrom!

I only use the pcb because it has the points to ide without having to use the motherboard.

[dragoncity]

Yes I Know but USE "normal" bios, don't use "no_gdrom" bios,ok?

[aldair]

(14.09.2017 21:26)dragoncity писал(а):  Yes I Know but USE "normal" bios, don't use "no_gdrom" bios,ok?

I want to make a fully printed sata PCB.



What is the difference of PCBs below:

[Gillbert]

(14.09.2017 21:13)dragoncity писал(а):  ... if someone understand please write me the answer...

He's using a GDROM PCB but without the I.C controllers (removed probably because they were defective), so it's actually an empty board being used for its solder points and its daughter connector.

[aldair]

(15.09.2017 00:44)Gillbert писал(а):  

(14.09.2017 21:13)dragoncity писал(а):  ... if someone understand please write me the answer...

He's using a GDROM PCB but without the I.C controllers (removed probably because they were defective), so it's actually an empty board being used for its solder points and its daughter connector.

[dragoncity]

(15.09.2017 00:44)Gillbert писал(а):  

(14.09.2017 21:13)dragoncity писал(а):  ... if someone understand please write me the answer...

He's using a GDROM PCB but without the I.C controllers (removed probably because they were defective), so it's actually an empty board being used for its solder points and its daughter connector.

Thank you,because aldair no explain ^^

Ok I saw after,but desolder... for me not a very good idea but ok...

[aldair]

(15.09.2017 12:20)dragoncity писал(а):  

(15.09.2017 00:44)Gillbert писал(а):  

(14.09.2017 21:13)dragoncity писал(а):  ... if someone understand please write me the answer...

He's using a GDROM PCB but without the I.C controllers (removed probably because they were defective), so it's actually an empty board being used for its solder points and its daughter connector.

Thank you,because aldair no explain ^^

Ok I saw after,but desolder... for me not a very good idea but ok...

It's for testing! tested with SATA adapter all hd's ran unrestricted. The IDE only with 40GB and LB48.

[pcwzrd13]

Just added Monaco Grand Prix On-Line to my compatibility list. As expected, it works on the same settings as the standard version of the game and still doesn't work with CDDA.

[Eyl]

(17.09.2017 19:19)pcwzrd13 писал(а):  Just added Monaco Grand Prix On-Line to my compatibility list. As expected, it works on the same settings as the standard version of the game and still doesn't work with CDDA.

But megavolt85 says that CCDA is working (in his rip of gdi). Wrong information. He's currently working on a version of the game for 80min CD.
Sorry for my bad English.

[megavolt85]

Eyl я не про DS говорил, я проверял на GDEMU,а с CDI версией пока засада, но я уже нашёл какой сектор не правильно читается, осталось найти почему

[fafadou]

The game in .cdi and not with gdi with cdda ?
It's probably better with mp3 downsample than an original raw file ?

[theodor613]

Skies of Arcadia {us} Both GDI and OPT is stuttering/lagging for me on ide HDD. Are there any specific settings for this game? Us console VA0 with ide HDD mod and DS 4 RC4.