ISO Loader 0.7.x Beta

[dragoncity]

You have link in my list (to the right).

Like Prototype :
https://hiddenpalace.org/Category:Dreamcast_prototypes

Hydro Thunder > NO VGA !!! So only in RGB... (list again..!)

[MastaG]

Thanks bro, will try the prototype and report back
I hope some of the no vga games like Bangai-O and hydro thunder can be patched to work in vga mode.
Bangai-O works btw, just broken rendering in vga mode.

[dragoncity]

I hope some of the no vga games like Bangai-O and hydro thunder can be patched to work in vga mode.
> No

[megavolt85]

(22.03.2020 17:24)MastaG писал(а):  So I patched 'San Francisco RUSH 2049 v1.002 (2000)(Midway)(PAL)(M6)' with the patch from opening post.
But when I run it, I'm getting a black screen?

EDIT: Checked the list.. with beta 7 loader it freezes in the main menu
Can somebody post the prototype?

Also Hyndro Thunder does not work with retrodream, used loader 3 with DMA and cdda (direct boot) but the dchdmi simply turns off the screen

RUSH 2049 v1.001 fine work with 0.7.0

[cryptblood1986]

https://imgur.com/a/K11nyJq

Messing with an idea today. I took Dragoncity's GD-IDE pinout and made it work on a va0 gd-rom. Pin 1 of the ide is connected to the first pin on the right side connected to a 10k resistor. I grabbed 5v with the grey wire.

Using an 80pin ide cable now. Things seem to work fine. I'm still testing.

[linerty]

(22.03.2020 20:51)megavolt85 писал(а):  RUSH 2049 v1.001 fine work with 0.7.0

Эту версию так и не нашел оригинале(Нашел в TOSEC USA). Пришлось собирать по нитке. За ISO английской версии спасибо luizroz. Русские mds скачаны с торента. Для сборки GDI 1ST_READ.BIN пропатчены на LBA45000.
Сделал из всего этого материала перепаковки.
Видео в хорошем качестве из оригинального дампа 1.002.
От 1.001 везде 1ST_READ.BIN и 2_DP.BIN. В русских версиях дополнительно *.LZS.
По ссылке SFR доступны репаки со скринами разницы 1.001 от оригинального 1.002:
SFR_2049_1.001_EN_GDI_OK
SFR_2049_1.001_RU_KUDOS_GDI_OK
SFR_2049_1.001_RU_VECTOR_GDI_OK

Тестировал на 0.7.0b3.
Русские репаки тестировал много. Работают стабильно.
Английский репак тестировал минут 5. Меню прошло, мне было достаточно.
Для использования в ISO Loader 0.7.x Beta нужно будет оптимизировать скачаное в optimize.bat.
По ссылке не гарантирую доступность контента. Может месяц пролежит, может 5 лет.

[linerty]

(22.03.2020 19:54)MastaG писал(а):  Thanks bro, will try the prototype and report back

I already try prototype. It not prototype . It pre-pre-pre alpha

[dragoncity]

Great I tested and added San Francisco Rush 2049 (Rush 2049) in the list !

http://dreamshell.infos.st

[cryptblood1986]

Tried San Francisco Rush 2049 working on loader 8 of Retrodream v2 using sata laptop hdd.

[fafadou]

San fransisco rush 2049 is good adds in the list :-)
0.7.x is pure jewel !

[cryptblood1986]

https://s1027.photobucket.com/user/GillB...u.jpg.html
Capacitors from 605-609 needs to be removed or no for sd card mod?

[dragoncity]

No.

https://dragoncity17.wordpress.com/2016/...rt-serial/

[cryptblood1986]

But in your link they are removed.

Planning to use a normal sd card to micro SD card.

[linerty]

(24.03.2020 13:18)cryptblood1986 писал(а):  Capacitors from 605-609 needs to be removed or no for sd card mod?

I desolder it.

[dragoncity]

(24.03.2020 15:45)cryptblood1986 писал(а):  But in your link they are removed.

Planning to use a normal sd card to micro SD card.

It's because it's an VA0,and there is NOT resistor on VA0.

But in VA1 there is,and don't need to remove.

[cryptblood1986]

Thanks I'll give it a try later.

[MastaG]

(22.03.2020 22:27)linerty писал(а):  

(22.03.2020 20:51)megavolt85 писал(а):  RUSH 2049 v1.001 fine work with 0.7.0

Эту версию так и не нашел оригинале(Нашел в TOSEC USA). Пришлось собирать по нитке. За ISO английской версии спасибо luizroz. Русские mds скачаны с торента. Для сборки GDI 1ST_READ.BIN пропатчены на LBA45000.
Сделал из всего этого материала перепаковки.
Видео в хорошем качестве из оригинального дампа 1.002.
От 1.001 везде 1ST_READ.BIN и 2_DP.BIN. В русских версиях дополнительно *.LZS.
По ссылке SFR доступны репаки со скринами разницы 1.001 от оригинального 1.002:
SFR_2049_1.001_EN_GDI_OK
SFR_2049_1.001_RU_KUDOS_GDI_OK
SFR_2049_1.001_RU_VECTOR_GDI_OK

Тестировал на 0.7.0b3.
Русские репаки тестировал много. Работают стабильно.
Английский репак тестировал минут 5. Меню прошло, мне было достаточно.
Для использования в ISO Loader 0.7.x Beta нужно будет оптимизировать скачаное в optimize.bat.
По ссылке не гарантирую доступность контента. Может месяц пролежит, может 5 лет.

Well I first tried it myself:
Get "San Francisco RUSH 2049 v1.001 (2000)(Midway)(NTSC)(US)[!].zip" from https://the-eye.eu/public/rom/Sega%20Dreamcast/

Unpack -> gdi optimize it -> Patch with instructions from first post:
sed -i 's/\x2C\xB1\x09\x00/\x17\xD2\xF3\x64/g' track05.iso
sed -i 's/\x09\x00\x09\x00/\x17\xD2\xF3\x64/g' track05.iso

But it didn't boot at all.. your version works great

I see it's already been added to the opening post.

Thanks!

[cryptblood1986]

imgur.com/a/vpuvOyD
I've added the sd card mod it boots fine and plays all non 0.7. I'm using an 80 pin ide to sata adapter to ssd. I've put the retrodream files in the sd card only. Still getting the same error as putting retrodream on ssd.

I'm not having issues loading 0.7 from standard 2.5 inch sata laptop.

[dragoncity]

Black Matrix AD added
> (Not Compatible VGA).

http://dreamshell.infos.st/

Config : Loader 9 (0.7.x beta 2) + IP.BIN CUT + 0x8ce00000.

But it's in JAP...there is not an translation in English?

---

(25.03.2020 16:52)cryptblood1986 писал(а):  imgur.com/a/vpuvOyD
I've added the sd card mod it boots fine and plays all non 0.7. I'm using an 80 pin ide to sata adapter to ssd. I've put the retrodream files in the sd card only. Still getting the same error as putting retrodream on ssd.

I'm not having issues loading 0.7 from standard 2.5 inch sata laptop.

Have you try an other SSD ?

Really strange because all in SSD work.

RetroDream & Games.

The blue IDE connector must be connected to the GD-IDE PCB.

And the end of the IDE cable to your IDE/SATA adapter. (not the middle one!)

[cryptblood1986]

https://imgur.com/a/xKDryZw


Still getting the no ide error. I'll try formatting it in smaller clusters. If not working I'll get another ssd.