ISO Loader 0.7.x Beta

[Ivan Guber]

На 4 уровне игра зависла.

[megavolt85]

(01.11.2020 16:57)kof888 писал(а):  why does the program have program addresses such as 8D001000 and 8D001300?

where you find this adres?

Ivan GR с какими настройками и загрузчиком запускал? Я с HDD не могу проверить, мой IDE2USB сдох, но с GDEMU я прошёл всю игру без зависаний

[dragoncity]

Work with memory 0x8cfd0000 thanks Megavolt

http://dreamshell.infos.st/

[kof888]

(01.11.2020 18:03)megavolt85 писал(а):  

(01.11.2020 16:57)kof888 писал(а):  why does the program have program addresses such as 8D001000 and 8D001300?

where you find this adres?

Ivan GR с какими настройками и загрузчиком запускал? Я с HDD не могу проверить, мой IDE2USB сдох, но с GDEMU я прошёл всю игру без зависаний

In the original version of the main program, these three places have been changed to jump to 8c0000c0

ps：There is a bug in this game. You can’t press the left and right directions quickly and alternately on the emulator, otherwise the emulator will crash. There is no such problem on dc.

[Ivan Guber]

(01.11.2020 18:03)megavolt85 писал(а):  Ivan GR с какими настройками и загрузчиком запускал?

настройки стандартные, загрузчик 0.7.0 b2.

Spoiler (Click to View)

[fafadou]

@Dragoncity : memory set 0x8cfd0000 is for 0.6.0 loader.
Did you try it with 0.7.x or 0.7.x_b3 ?

It's a very good new this fantastic @megavolt85's job is playable with 0.6.0

[EduardoKmus]

Hello friends, any ideal configuration to run Metal Slug 6 in DreamShell with loader 0.7.X? It doesn't work with any charger so far, I use HDD Sata 2.5"

[MastaG]

Unbelievable Megavolt!
I always wanted to play Metal Slug since I've never played it (not a single version before).
I'm running it on RetroDeam from my CF card with:
Loader 1: v0.6.6, Address: 0x8cfd0000 and DMA enabled.

I seem to be really good at it as well (almost no deaths ) only the game froze after finishing the second level (when climbing the mountains), you see the intro of the third level briefly then it locks up.
Could be due to the isoloader or address or something else? (couldn't get it to work with 0.7.0).

[dragoncity]

With loader 0.7.x doesn't work..block at loading.

Need loader "auto" and memory 0x8cfd0000.

[dragoncity]

Edit !

I think I found the good memory : 0x8cfe8000

I played until Mission 4 !

[aldair]

Just replace track04.iso that is on the link below:
Download: https://www.mediafire.com/file/bkiezx1sw...4.iso/file

[megavolt85]

Metal Slug 6 обновлён
1) исправлена ошибка приводящая к зависаниям
2) включена красная кровь
3) включена автострельба
4) добавлена пауза

[K470r]

(03.11.2020 17:12)megavolt85 писал(а):  Metal Slug 6 обновлён
1) исправлена ошибка приводящая к зависаниям
2) включена красная кровь
3) включена автострельба
4) добавлена пауза

Muchas gracias, tu trabajo es genial. Lo probaré esta noche

[Ivan Guber]

Прошел на easy Metal Slug 6 (адрес выставил 0x8cfd0000).

[MastaG]

(02.11.2020 00:35)dragoncity писал(а):  Edit !

I think I found the good memory : 0x8cfe8000

I played until Mission 4 !

Same address is working fine indeed.
Only had to disable DMA or else it refuses to start (perhaps due to CF card not supporting it).
I just finished the game, first time I played metal slug in my life.
What an awesome game it is, great gameplay and art work.

Thanks megavolt85, this was a very nice present my friend!
Love and respect for the work you've put into this

[fafadou]

@megavolt85 : I know you are in other project, just for information a github about sending sound to AICA was shared in dreamcast talk forum.
It's probaly documentation you have already. But perhaps it can help for adding cdda to 0.7.x one day.

https://github.com/pcercuei/AICAOS

And a DCE forum topic about AICA and ARM7 with informations too :
https://dcemulation.org/phpBB/viewtopic....29&t=27769

@Mastag
Yes. Sometimes preset are a little different, it depends of your hardware.

[dragoncity]

(06.11.2020 02:34)MastaG писал(а):  

(02.11.2020 00:35)dragoncity писал(а):  Edit !

I think I found the good memory : 0x8cfe8000

I played until Mission 4 !

Same address is working fine indeed.
Only had to disable DMA or else it refuses to start (perhaps due to CF card not supporting it).
I just finished the game, first time I played metal slug in my life.
What an awesome game it is, great gameplay and art work.

Thanks megavolt85, this was a very nice present my friend!
Love and respect for the work you've put into this

I don't use DMA too,when I say nothing about DMA on my list don't activate

http://dreamshell.infos.st

Great if this memory work and you finish the game.

It's good for future release...like "Dolphin Blue"

[MetalliC]

(01.11.2020 18:29)kof888 писал(а):  ps：There is a bug in this game. You can’t press the left and right directions quickly and alternately on the emulator, otherwise the emulator will crash. There is no such problem on dc.

this is bug in original game, it has been confirmed on real Atomiswave with a special keypad which allows to simultaneously press left+right. it is NOT emulation problem.
obviously, you can't reproduce this issue if using gamepad or stick, because you will not be able to press opposite directions at the same time.

[SWAT]

(06.11.2020 12:53)dragoncity писал(а):  

(06.11.2020 02:34)MastaG писал(а):  Only had to disable DMA or else it refuses to start (perhaps due to CF card not supporting it).

I don't use DMA too,when I say nothing about DMA on my list don't activate

Guys, ISO Loader 0.7.x works only in DMA mode PIO only if game asked PIO reading, but not if a want for you ))

[megavolt85]

King of Fighters XI added to first post