SPI serial access mode is avaliable on 8GB sandisk micro SDHC card

[Z-Gradt]

(25.01.2011 17:58)ms18e писал(а):  I've tried two 8GB sandisk micro SDHC cards(class 2 and class 4) with DreamShell SDL, and both of them works. Then we have more choices purchasing SD/TF cards

I've got a few of the XCK adapters and I keep getting "Can't init SD filesystem". I've tried 2 different DC's, and 3 different cards:
2 GB Corsair 133x
4 GB pqi class 6
8 GB Kingston class 4

And none of them work. I formatted them using FAT32 with 4k blocks, and with 32k blocks. Once I tried just formatting it on the camera, then copying the DS directory.

I've also got an 8 GB Patriot class 10 that I haven't tried, but I thought I'd see if anyone had any suggestions as to what my problem is. Anyone know an easy way to check these with a multimeter? I'm not so good at reading schematics.

I'm contacting the seller to see what they think. I can't see any capacitors or resistors through the clear plastic, but I guess they could be covered by glue. I have noticed that the error message takes longer to show up when I have the adapter plugged in, but I can't tell if it's doing anything since there isn't an access light. The message comes up right away when the serial port is empty.