Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Dreamshell and DC SD card reader: can't init file system
Автор Сообщение
Locobox Не на форуме
Новичок
*

Сообщений: 4
Зарегистрирован: 02.11.2011
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #1
Dreamshell and DC SD card reader: can't init file system
Hi everyone!

I get this message every time I try to access the SD card with Dreamshell:

Can't init filesystem

I have however loaded succesfully the SD card before, I made the adapter my self from the popular tutorials you can find on the web.

So far this is what I have tried already:

I have connected the serial SD card reader to 3 different Dreamcasts with the same results:
Power on the console and instantly the LED on the card reader lights up (Weak light at this moment) the LED stays that way till the Dreamshell screen appears then it (The LED) emits a brighter light, flashes just 1 time and then never flashes again but stays brighter! at this moment the error message appears on screen Can't init filesystem

From what I have seen before when everything was working fine (On this same card reader) I know that the LED must flash a lot of times to access the SD card, this won´t happen now!

I've tried 4 different SD cards: Sd 1gb, sd 512mbs, sdhc 16gbs, sd 128mbs, these cards used to work fine with the DC card reader.

I'm using Dreamshell 4.0b I´ve tried both versions (From CD and from SD Card) wont load any card.

All the cards have been FAT32 formatted.

I've checked the serial connector I made attached it to the Dreamcast serial port to see if there is any shorted pins or any continuity related problems, checked pin by pin all passed, te connection between the DC serial port and the serial connector is stable.

I made 2 DC SD card readers to see if there was any problem with the first card reader I built, both card readers show the same behaviour.

All SD cards works fine on my PC, I might be wronge but I think SD cards are the sort of device that works or don't so as I stated before I don't think the cards are the problem.

Don't know what else to do, This adapter worked fine for a few days and suddenly won't load the SD card anymore!

Here are some pics of my DC SD card reader (And my aweful soldering job):
[Изображение: are-this-electric-prints-the-same-002.jpg]

Any suggestions?
Thanks in advance for any help on this matter.

/Marc
02.11.2011 14:04
Найти все сообщения Цитировать это сообщение
Создать ответ 


Сообщения в этой теме
Dreamshell and DC SD card reader: can't init file system - Locobox - 02.11.2011 14:04

Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  Dreamshell 4.0.4 whschimmel 6 2987 24.08.2026 17:12
Посл. сообщение: whschimmel
  Problem with CF card after formatting fabio14789 2 2085 18.07.2026 14:09
Посл. сообщение: fabio14789
  Is this 2.5 IDE to SD adapter compatible with dreamshell? Imito 5 6666 07.04.2026 21:04
Посл. сообщение: ands
  Dreamshell is approaching 100%! aldair 0 2904 15.03.2026 19:14
Посл. сообщение: aldair
  This is evolution in Dreamshell! aldair 0 2964 11.03.2026 05:33
Посл. сообщение: aldair
  This is Dreamshell in 2026! aldair 0 3465 01.02.2026 15:57
Посл. сообщение: aldair
  Now it's compact! / Dreamshell aldair 0 3410 22.01.2026 00:48
Посл. сообщение: aldair
  A mini-documentary I made about DreamShell EduardoKmus 1 4679 04.01.2026 17:46
Посл. сообщение: fafadou
  Windows CE Games on Dreamshell SD Card aldair 0 3706 02.01.2026 17:48
Посл. сообщение: aldair
  Homebrew 100% on Dreamshell/DUX/Dreamcast aldair 3 9975 28.10.2025 14:20
Посл. сообщение: fafadou

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)