Problems with SD Card Adapter and/or Dreamshell.

[Stryfe]

(04.03.2012 06:46)aldair писал(а):  It happened to me too, using SD card 2-Gig, was resetting.
I used 4 Gigas worked perfectly!

Mine was not resetting. It wasn't being detected in the file browser, or the sd loader menus at all.

(04.03.2012 09:22)SWAT писал(а):  Why do you use FAt 16? It is better to use FAT 32.
Try these cards on Beta 4 and tell me the result plz.

Only because it was the default for that size card, but I had also tried a 16 GB formatted as Fat32.

(04.03.2012 13:52)alex писал(а):  First you must plug in SD card adapter with SD card plugged in then boot up Dreamhell.

Okay. I have done this, but the card still isn't being detected.

Well then..., I guess I'm out of luck with this particular card.

I have no previous experience with circuitry, wiring, soldering, etc., and I have no soldering tools at the moment. Is there a possibility I may be able to repair the unit, or could someone suggest the easiest method for making one of my own?

I read a thread on assemblergames.com that it might even be possible using parts from an old 3.5" floppy drive, and considering I have an entire box of floppy drives, maybe I could try that one.

What else would I need if I found a matching floppy drive connector? Sorry for the newbness on the matter.