DreamShell Compatible 44-Pin IDE-to-SATA & SD-to-SATA Adapters

[pcwzrd13]

I bought this IDE-to-SATA adapter a couple years ago and I could never get it to work but I found the solution today! Turns out all I needed to do is cut pin 1 and bridge JP1 (HDD Select) on the board. Now it works perfectly! If anyone is looking for a cheap 44-pin IDE-to-SATA adapter, this is the one to get! The model on the chip is JM20330.

https://ebay.us/jQDi6B



Edit: Found a SATA-to-SD adapter that works as well! Unfortunately it doesn't support LBA28 so it won't work with the 0.7.X loader. No problems booting DreamShell from it or using the 0.6 loader though.

https://ebay.us/j512Mt