G1-ATA Devices

[zolwikwkurwik]

I got kingston 4GB x133 CF card and using 44pin CF-IDE adapter I got same results like with my laptop IDE 44pin 30GB HDD (NTFS). The screen freezes at "Starting G1 ATA test program..." so propably there is something wrong with my connection. I will check it this week and because of that I have few questions:

1. If I have the GD-ROM drive in G1 socket do I have to connect GDD_CDDA_CLK+DC_CDD_CLK and G_RST+GDD_RST+ATA_RST?

2. Is my setup ok?

On 44pin IDE cable additional pins are:
41 +5VL ------> +5VC (Logic)
42 +5VM ------> +5VC (Motor)
43 GND ------> Ground
44 /TYPE -----> Type (0=ATA)

I have pin 41 and 42 connected together and soldered to 5V from DC motherboard.
Pin 44 is not connected to anything (or it should be connected to ground?)
All Grounds are connected with each other (power ground and "normal" ground).