DreamShell v4.0.0 Release

[yo4yo4]

(06.03.2024 13:05)svk77 писал(а):  

(06.03.2024 11:49)yo4yo4 писал(а):  How about the address 0x8c004800?

(02.03.2024 11:34)svk77 писал(а):  I tried everything loader memory address from the settings.

(06.03.2024 11:49)yo4yo4 писал(а):  IDE pin 1 and GND are connected with a 470pf capacitor (voltage is needed for the reset signal).

My reset signal is not connected at all. I don't think that's the problem. I have already tested many games, only this one freezes. The behavior is the same with an ssd (JM20330 converter), an ide hdd, and a compact flash card.

(06.03.2024 11:49)yo4yo4 писал(а):  Sorry for the delay in responding.

Thanks for your reply in private messages. I'll try these images.

At first, it's just my environment, but I tried a lot of things.
Region eur PAL fr
ROM image US PAL
Frequency 50Hz
SSD 840 EVO 120GB
Adapter jm20330 limit 137GB 48LBA ATA1.0a ATA133
5V changed to free land on GDPCB due to frequent voltage drop when supplied from 12V to regulator conversion.
Everything else crashed.
When I go to read CDDA, it freezes. When I try it with SSD, the error recovery of the improvement item works, but after the sound like at the time of construction is heard like when the IRQ of the Japanese version is turned off, the background music is not heard, but it doesn't freeze. I think the IRQ hooking is not working, but I don't know.
I've left it for a day and it doesn't freeze at all, so I'm shutting it down.

Thank you for all your help.