Change swirl color without changing region?

[b0xybr0wn_0]

Hi all,

I was wondering if it is possible to change the color of the swirl / logo without changing the region. I'd like to change my orange swirl to blue, but keep my console NTSC-U

Thanks

[SWAT]

Only by hack the BIOS code.

[b0xybr0wn_0]

I was reading how to do this, and i found this

Цитата:Region change for dc_flash.bin:
When you go to pos. 0x1A002, with an Hex editor, you can change it to:
0x30: Japan region (NTSC, Orange swirl),
0x31: USA region (NTSC, Orange swirl),
0x32: Euro (Pal, Blue swirl)
Found this somewhere.

Could you give more info on how to change the swirl/logo color without changing the region? Is that possible using dreamshell? I only want to do this once using your guide here http://www.dc-swat.ru/blog/hardware/1082.html#cut

Thanks for any help

[SWAT]

This info about change region and by it changed swirl color.
If you like change only color, need research the BIOS firmware and change some code. I don't know where you can do it, because not research this place.