ISO Loader 0.7.x Beta

[dragoncity]

(25.02.2019 03:09)megavolt85 писал(а):  

(25.02.2019 00:03)dragoncity писал(а):  Try remove Pin 1

look this

he added capacity 400-500 pf between grounding and reset

Capacitor 400pf between Pin 1 and Ground?

[megavolt85]

(25.02.2019 13:04)dragoncity писал(а):  Capacitor 400pf between Pin 1 and Ground?

yes

(25.02.2019 12:13)fafadou писал(а):  @MilkeyWilkey : nfl blitz works with loader 0.6.3

CDI or GDI? what is BIOS used for boot DreamShell?
GDI use part of bios for descramble and can't work with custom BIOS

[fafadou]

It's pcwzrd13 who have seen it with 0.6.3 but it was only the 2001 version not the 2000. So I don't know the bios he has...

Maybe dragoncity could tell more too.

[dragoncity]

Nfl Blitz 2001 work with "5.bin > 0.6.3_noWINCE_noCDDA_gcc7.1",but not the 2000.

[pcwzrd13]

(25.02.2019 16:32)fafadou писал(а):  It's pcwzrd13 who have seen it with 0.6.3 but it was only the 2001 version not the 2000. So I don't know the bios he has...

Yeah, 2001 worked with this build of 0.6.3 as well as 0.7.x. 2000 doesn't work on any loader.

[aldair]

(25.02.2019 17:24)pcwzrd13 писал(а):  

(25.02.2019 16:32)fafadou писал(а):  It's pcwzrd13 who have seen it with 0.6.3 but it was only the 2001 version not the 2000. So I don't know the bios he has...

Yeah, 2001 worked with this build of 0.6.3 as well as 0.7.x. 2000 doesn't work on any loader.

kof2000 Works on RC4 isoloader 6.0 in composite video, using VGA does not work

---

(24.02.2019 21:43)RazorX2018 писал(а):  can anyone help me figure this out please, i bought an 44 pin ide to msata board because i want to replace my 44 pin 250gb ide hdd in the dreamcast but it doesn't get past the boot loader screen.

here's the board:


here is where it gets stuck:



i'm currently using the boot_loader_devkit.bios

It can work if using SD card this is biosnogedrom bug.
Perform this test before displaying on the screen sd card press start.

[fafadou]

@ all : which bios for nfl blitz 2001 ? the bios protection seems to be only on nfl blitz 2000 version.

[EduardoKmus]

Friends I have "NBA 2K2 v1.000 (2001) (Sega) (NTSC) (US) [!] [1S 51178]" and manages to load perfectly but only until the intro video. From then on there is a black screen, wait more than 30 seconds and nothing happens ... I'm using SATA-Mod (Soulcalibur, Space Racer, Baseball 2k2 and Metropolis Street Racer).

[megavolt85]

(18.02.2019 22:41)dragoncity писал(а):  Boku no Tennis Jinsei (My Tennis Life) >> Need GDI for TEST !!

i'm check, it's work fine

[dragoncity]

(25.02.2019 21:10)megavolt85 писал(а):  

(18.02.2019 22:41)dragoncity писал(а):  Boku no Tennis Jinsei (My Tennis Life) >> Need GDI for TEST !!

i'm check, it's work fine

Great I figured, thanks for the feedback,I update the list

[EduardoKmus]

(Soulcalibur, Space Racer, Baseball 2k2 and Metropolis Street Racer) work perfectly ... Has anyone else tried NBA2k2 with SATA-Mod?

[dragoncity]

(25.02.2019 21:32)EduardoKmus писал(а):  (Soulcalibur, Space Racer, Baseball 2k2 and Metropolis Street Racer) work perfectly ... Has anyone else tried NBA2k2 with SATA-Mod?

Yes doesn't work for me too,but for me also in IDE CF ^^

So need more test with Megavolt when I get what I need.

[MilkeyWilkey]

Works for me in ide. Try using ip.bin or vga/composite

[RazorX2018]

looks like i'm not gonna have much luck using a msata drive, i have setup my dreamcast to boot directly into dreamshell via sd card and i removed the wire for pin 1 as suggested and removed the DS folder from the msata drive and even though i do believe dreamshell is picking it up, as soon as i try to boot iso loader it just stays on the loading screen.

i may have to go down the ssd route instead although that means having to buy one and an adapter.

---

(25.02.2019 17:49)aldair писал(а):  

(25.02.2019 17:24)pcwzrd13 писал(а):  

(25.02.2019 16:32)fafadou писал(а):  It's pcwzrd13 who have seen it with 0.6.3 but it was only the 2001 version not the 2000. So I don't know the bios he has...

Yeah, 2001 worked with this build of 0.6.3 as well as 0.7.x. 2000 doesn't work on any loader.

kof2000 Works on RC4 isoloader 6.0 in composite video, using VGA does not work

---

(24.02.2019 21:43)RazorX2018 писал(а):  can anyone help me figure this out please, i bought an 44 pin ide to msata board because i want to replace my 44 pin 250gb ide hdd in the dreamcast but it doesn't get past the boot loader screen.

here's the board:


here is where it gets stuck:



i'm currently using the boot_loader_devkit.bios

It can work if using SD card this is biosnogedrom bug.
Perform this test before displaying on the screen sd card press start.

i have the gdrom still connected as well as the hdd

[dragoncity]

Do you use IDE cable ATA133?

With ATA100 many SATA doesn't work,same problem like you !!

So you need a pcb and no problem

[RazorX2018]

(25.02.2019 23:34)dragoncity писал(а):  Do you use IDE cable ATA133?

With ATA100 many SATA doesn't work,same problem like you !!

So you need a pcb and no problem

because i have a 250gb 44 pin hdd at the moment i am using one of these cables Here and i am supplying it with 5v and ground.

i am also using your pcb:

[dragoncity]

Not good the cable !

Use IDE CABLE ATA133 very important for SATA !

With my PCB you can without problem

---

So need for example :

https://www.ebay.fr/itm/IDE-2-5-to-3-5-L...3370777193

And very IMPORTANT ATA133 "32AWG" because some "30AWG" have problem.

You can see this mention directly on the cable.

[RazorX2018]

(25.02.2019 23:50)dragoncity писал(а):  Not good the cable !

Use IDE CABLE ATA133 very important for SATA !

With my PCB you can without problem

i will need to find one short and flat enough for my gdrom setup:


any ideas?

[dragoncity]

short ...difficult and not the good solution sometimes.

I tested MANY IDE cable...short..long...AWG30..AWG32...

I tried cut the cable...NOT A GOOD IDEA ...doesn't work after !

And the result it's USE ATA133 "AWG32" and DON'T cut the cable.

Put blue connector in the PCB,and the other side (one of the two) on the adapter.

[RazorX2018]

(25.02.2019 23:59)dragoncity писал(а):  short ...difficult and not the good solution sometimes.

I tested MANY IDE cable...short..long...AWG30..AWG32...

I tried cut the cable...NOT A GOOD IDEA ...doesn't work after !

And the result it's USE ATA133 "AWG32" and DON'T cut the cable.

Put blue connector in the PCB,and the other side (one of the two) on the adapter.

i am working on multiple consoles at the minute so for now i will just stick with the 250gb ide hdd until i'm done with some of my other stuff and then i will see about changing it to an ssd.

thanks.