Gd Ide hard drive not recognized

[Worek1]

Hi guys , I've tried to instal gd Ide on my Dreamcast and I have an issue . Everything is solder ok , socket , points on gd Ide , ground , 5v from alternative point.Im using Ide to sata adapter with SATA SSD 260gb , adapter set to slave I've checked all points with multimeter , all ok , power on SATA adapter ok.Hdd formated fat32 32k cluster.Booting dreamshell from disk and hdd not recognised.Tried to boot dreamshell from SD adapter just to see if file manager see a hdd but nothing.Ive tried everything , please help

[megavolt85]

what is chipset in your SATA2IDE?

[Worek1]

(15.07.2019 03:15)megavolt85 писал(а):  what is chipset in your SATA2IDE?

This one



https://www.ebay.co.uk/itm/New-2-5-3-5-D...2749.l2648

[Worek1]

876J40141 dof this is on a chipset

[fafadou]

Have you tried with an ide drive ?

How long is your ground ?

[megavolt85]

hm, chipset is IC with a sticker "Q.C. PASSED"
remove this sticker and read what writed

[Worek1]

(16.07.2019 17:56)megavolt85 писал(а):  hm, chipset is IC with a sticker "Q.C. PASSED"
remove this sticker and read what writed

D.O.F
876J40141

[Worek1]

(16.07.2019 17:00)fafadou писал(а):  Have you tried with an ide drive ?

How long is your ground ?

do not have any ide hdd

what you meant ? maybe ive missed something with grn , ive just soldered a grn point on pcb

[aldair]

(17.07.2019 03:50)Worek1 писал(а):  

(16.07.2019 17:00)fafadou писал(а):  Have you tried with an ide drive ?

How long is your ground ?

do not have any ide hdd

what you meant ? maybe ive missed something with grn , ive just soldered a grn point on pcb

Link: http://www.dc-swat.ru/forum/thread-2446....IPSET+SATA

[fafadou]

Your ground must be shorter as passible around 5cm and only pin 2.

@aldair : "whaouh" ^^ I advise to check your ground 2 in first.

[aldair]

(17.07.2019 13:14)fafadou писал(а):  Your ground must be shorter as passible around 5cm and only pin 2.

@aldair : "whaouh" ^^ I advise to check your ground 2 in first.

This ide for sata needs to make the slave to work.
It does not have option to slave, need to do as in the picture below.

[Worek1]

sorry guys didnt noticed that on a picture there is no jumper to set to slave , my adapter have a jumper and it is set to slave.Do i need to connect ground to adapter ? it is my first time wit dc modding

[aldair]

(17.07.2019 18:30)Worek1 писал(а):  sorry guys didnt noticed that on a picture there is no jumper to set to slave , my adapter have a jumper and it is set to slave.Do i need to connect ground to adapter ? it is my first time wit dc modding

Check the 12 volt supply voltage. I have ide without this voltage going to pcb of the optical unit it does not recognize the IDE.

[Worek1]

Ok guys , I bought dreamshell SD + cd dreamshell from eBay.After months I have realized that hdd was set to logical disk not primary . It is regonasible in dreamshell now in file manager . I have a full access to ide but I cannot boot dram shell from Ide , I have a system folder ds in root but I won't boot dreamshell until I connect SD serial adapter. Any help ?

[Worek1]

(20.09.2019 02:08)Worek1 писал(а):  Ok guys , I bought dreamshell SD + cd dreamshell from eBay.After months I have realized that hdd was set to logical disk not primary . It is regonasible in dreamshell now in file manager . I have a full access to ide but I cannot boot dram shell from Ide , I have a system folder ds in root but I won't boot dreamshell until I connect SD serial adapter. Any help ?

Sorted !!! My boot cd was hacked ver. , I burned new cd and it is working great