Duke Nukem 3D Atomic Edition 1.5

[Ivan Guber]

Исправлена ​​проблема нехватки памяти.
Улучшена производительность.
Добавлено сохранение на ide и sd.
Переделано управление для Dreamcast контроллера.
Настроено управление для XBOX360 контроллера.
Добавлено управление мышью (нужно размапить кнопки мыши).
Клавиатура поддерживается.

Управление для Dreamcast контроллера (Click to View)

Y - идти вперед.
A - идти назад.
X - стрейф влево.
B - стрейф вправо.

Аналог
повороты влево, вправо.
Наклон вниз, вверх (включается в опциях мыши).

Крестик
Вверх - кнопка действия.
Вниз - присесть.
Влево - переключение предметов.
Вправо - переключение оружия.
Вверх + старт - использовать предмет из инвентаря.

Start - меню
L - прыжок
R - стрелять

Управление для XBOX360 контроллера (Click to View)

Перед запуском игры на XBOX360 контроллере нужно зажать кнопку XBOX и нажать на x.
XBOX360 Контроллер должен быть подключен через usb4maple адаптер.

Левый Аналог
Идти вперед, назад, стрейф влево, вправо. Кнопка - присесть.

Правый аналог
Повороты влево, вправо, наклон вниз, вверх (включается в опциях мыши). Кнопка - использовать предмет из инвентаря.

A, Y - переключение предметов.
X, B - переключение оружия.

Крестик
Вверх - увеличить размер окна
Вниз - уменьшить размер окна
Влево - перейти в меню загрузки игры
Вправо - перейти в меню сохранения игры

L - прыжок.
R - стрелять.
LB - пинок.
RB - кнопка действия.
Start - меню.
Select - использовать аптечку.

Скачать (Click to View)

GDEmu
https://mega.nz/file/x3RTyIIL#zB7zoyCDll...MZEjIVAaIE
Dreamshell
https://mega.nz/file/x2gWjarQ#ulnZDtmYbb...E3k6NS2JFg

[fafadou]

This is huge ! Well done !

[fafadou]

I didn't be able to save, is it working ?

[Ivan Guber]

(30.09.2024 03:21)fafadou писал(а):  I didn't be able to save, is it working ?

How you tried to save, on sd adapter or hdd?

[fafadou]

(30.09.2024 08:42)Ivan Guber писал(а):  

(30.09.2024 03:21)fafadou писал(а):  I didn't be able to save, is it working ?

How you tried to save, on sd adapter or hdd?

On HDD, may i did something wrong ?

[Ivan Guber]

(01.10.2024 01:05)fafadou писал(а):  

(30.09.2024 08:42)Ivan Guber писал(а):  

(30.09.2024 03:21)fafadou писал(а):  I didn't be able to save, is it working ?

How you tried to save, on sd adapter or hdd?

On HDD, may i did something wrong ?

You use Dreamshell 4.0 release?

On my Dreamcast with hdd it saved and loaded (tested on DS 4.0 release).

[fafadou]

Ok thanks for showing the preset, I'll try again.

[awfan]

Hello Ivan,

I tried your GDEmu-version, but unfortunately I get only a black screen and nothing more.

I also read on the dc-talk-forum, that the problem maybe comes from the direct ide/sd access, and therefor you had provided a version without saving to sd and ide (for MODE users). But the links there are dead. Could you please provide this version here too?

I really want to try it out on my DC.

Bests,
AWFan

[Ivan Guber]

What firmware on your gdemu?

Version without saving.
https://mega.nz/file/svhCBBiT#7bm7CVdzo2...FjPpeUqdYs

[awfan]

This was fast, thanks. I will try it out if I'm at home.

Regarding the firmware version - hmm, I don't know. It's still the same version which was installed when I bought it, but I will check and report it here...

Regards

[awfan]

Hey Ivan,

i tried your version without the saving feature, but got again only a black screen...

(23.10.2024 13:34)Ivan Guber писал(а):  What firmware on your gdemu?

I checked the fw version, it's 5.15.0 (with bootrom 1.01d). Is this the problem, mostly all CDIs i tried in the last couple years did work without any problems?!

Any tips I can try?

Bests,
AWfan

[awfan]

Hello Ivan,

(23.10.2024 13:34)Ivan Guber писал(а):  What firmware on your gdemu?

which firmware version is needed on the GDEmu at least?

Bests,
AWfan

[Ivan Guber]

(24.10.2024 16:01)awfan писал(а):  Hey Ivan,

i tried your version without the saving feature, but got again only a black screen...

(23.10.2024 13:34)Ivan Guber писал(а):  What firmware on your gdemu?

I checked the fw version, it's 5.15.0 (with bootrom 1.01d). Is this the problem, mostly all CDIs i tried in the last couple years did work without any problems?!

Any tips I can try?

Bests,
AWfan

It's strange what game not running on your gdemu. Game must start without any settings.

I have the same gdemu firmware and game running fine.
https://youtube.com/shorts/XsatcnH48BI

[awfan]

(25.10.2024 20:53)Ivan Guber писал(а):  It's strange what game not running on your gdemu. Game must start without any settings.

I have the same gdemu firmware and game running fine.
https://youtube.com/shorts/XsatcnH48BI

really don't known when the last time a game wouldn't run, especially because I always found later a working CDI/GDI, so maybe only bad CDIs in the first place...

But I noticed two things while watching your video:
a) you seem to use another CDI because your GDmemu show the right title "Duke Nukem 3D Atomic Edition 1.5", here it showed only "Unknown"...
b) your SYSINFO shows "RGB/SCART" as video cable and I have only Composite

Maybe (b) is the source of my problem?

I will try it later today again with a fresh SDcard assuming you're using the same CDI as the one you gave me, only to check if the correct name will be shown after that...

Nice weekend

[Ivan Guber]

(26.10.2024 17:19)awfan писал(а):  a) you seem to use another CDI because your GDmemu show the right title "Duke Nukem 3D Atomic Edition 1.5", here it showed only "Unknown"...

It's becouse i rename it on GDMENUCardManager. It's the same cdi.

(26.10.2024 17:19)awfan писал(а):  b) your SYSINFO shows "RGB/SCART" as video cable and I have only Composite

It also works on composite, i tested it today.

[sergey2007]

В чем отличия версий Gdemu и DreamShell?

[Ivan Guber]

(29.10.2024 01:18)sergey2007 писал(а):  В чем отличия версий Gdemu и DreamShell?

Отличий особых нет.
Для gdemu образ в формате CDI, для dreamshell в формате ISO.
Плюс в dreamshell версии понизил скорость заставок, так как с sd карты они быстро проигрывались.

[awfan]

Hello Ivan,

(26.10.2024 19:36)Ivan Guber писал(а):  It's becouse i rename it on GDMENUCardManager. It's the same cdi.
It also works on composite, i tested it today.

first, sorry for the late reply but I was completly offline for some days...

But in the meantime I found enough spare time to set up an empty SDcard containing only GDmenu and your duke port. The first try to start duke from this card did only show the black screen after the Dreamcast FW-splash screen again. Hmm, not nice.

I really don't know why I tried it again, but unintended choosed "01 GDmenu" instead of "02 Unkown" on the second try, but I noticed that. So, while the FW-splash screen was shown I simply used the "next entry button" and held the start button on the controller while the "SEGA screen" after the boot splash was shown. And what should I say, the screen went black only for a short time and after that showed a "Press Y for 60hz" and the duke finally runs. I tried that several times now, and this way works...

What the hell is going on. Can you explain that behaviour? Do you have any "special" settings in your GDEMU.ini? What FAT32 cluster size do you use - I noticed strange behaviour with another flash card in the past with different cluster sizes, etc.?

There must be an explanation... Is it possible that you "dump" your SDcard containing only GDmenu and your duke port, maybe ideally using "dd" under Linux and make that available? If the card was really empty before you put GDmenu+duke on it, than the card's overall size shouldn't matter after compressing the dump...

Bests,
AWfan

[Ivan Guber]

(03.11.2024 19:39)awfan писал(а):  Do you have any "special" settings in your GDEMU.ini?

No.

(03.11.2024 19:39)awfan писал(а):  What FAT32 cluster size do you use

32kb

All I do, it's just add cdi on sd card via GDMENUCardManager. Then run game from GDmenu. That's all.

SD card i format in SD Card Formatter.