+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: Sega Dreamcast (/forum-2.html)
+--- Форум: English section (/forum-29.html)
+--- Тема: Convert CDI/GDI in ISO with CDDA (/thread-3115.html)
RE: Convert CDI/GDI in ISO with CDDA - megavolt85 - 01.06.2018 13:00
1) yes, lazyboot
2) wait new version DS
RE: Convert CDI/GDI in ISO with CDDA - dragoncity - 02.06.2018 16:42
Ok.
For the moment,if I create a GDI file (disc.gdi),what should I put inside to launch the ISO?
Thanks
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 03.06.2018 16:10
data without IP.BIN in the data folder
IP.BIN
cdda in raw format
For extract the ip.bin from the cdi I use ip extractor
RE: Convert CDI/GDI in ISO with CDDA - megavolt85 - 05.06.2018 01:19
(02.06.2018 16:42)dragoncity писал(а): For the moment,if I create a GDI file (disc.gdi),what should I put inside to launch the ISO?
need build ISO with LBA 45000
RE: Convert CDI/GDI in ISO with CDDA - dragoncity - 05.06.2018 01:28
Ok it's boring ^^
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 05.06.2018 13:24
I see often 11702 what is the difference with 45000 lba ?
So we have to BINHACK the ip.bin and 1ST_READ.BIN thanks.
How many time to wait for new DS ? ;-)
RE: Convert CDI/GDI in ISO with CDDA - SWAT - 06.06.2018 09:45
Supported filenames for CDDA tracks for GDI/ISO (index for example):
Цитата:track04.raw
track04.wav
track04.raw.wav
Supported formats:
Цитата:PCM 16 bit stereo 44100 Hz (as RAW track)
PCM 8 bit
ADPCM 4 bit
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 06.06.2018 12:34
Thanks :-) good to see you two here.
Hope you are both well.
thanks for all your answers.
just asking a new time for the difference when I saw 11702 and 45000lba ? and how calculate it with cdda games without burning a cd with cdrecord tool, Even if lazy boot do the job.
it's really hard for me to tell the difference between the two...
RE: Convert CDI/GDI in ISO with CDDA - megavolt85 - 06.06.2018 14:06
(05.06.2018 13:24)fafadou писал(а): I see often 11702 what is the difference with 45000 lba ?
GDI can be only with lba 45000
name of audio tracks started from track04.xxx
xxx - wav, raw or raw.wav
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 06.06.2018 15:13
ok thanks a lot.
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 12.12.2018 13:30
Is it possible to have a .wav and make it back in .raw ?
When you use the echelon method with burning a cd you have to binhack the ip.bin and 1st_read. at the end of cdda and after mkisofs and you create an .iso
It's an iso compatible dreamshell ?
RE: Convert CDI/GDI in ISO with CDDA - SWAT - 15.12.2018 09:33
(12.12.2018 13:30)fafadou писал(а): Is it possible to have a .wav and make it back in .raw ?
RAW and WAV it's the same.
WAV it's a RAW with header for describe PCM stream format. For CD it standart - 16bit stereo PCM 44kHz.
ISO Loader apply it for RAW by default.
(12.12.2018 13:30)fafadou писал(а): When you use the echelon method with burning a cd you have to binhack the ip.bin and 1st_read. at the end of cdda and after mkisofs and you create an .iso
It's an iso compatible dreamshell ?
Yes, but I recommend hack LBA to zero.
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 15.12.2018 13:54
(15.12.2018 09:33)SWAT писал(а): RAW and WAV it's the same.so isoloader can play both ?
WAV it's a RAW with header for describe PCM stream format. For CD it standart - 16bit stereo PCM 44kHz.
ISO Loader apply it for RAW by default.
(15.12.2018 09:33)SWAT писал(а): Yes, but I recommend hack LBA to zero.
Thanks :-)
RE: Convert CDI/GDI in ISO with CDDA - SWAT - 16.12.2018 09:48
(15.12.2018 13:54)fafadou писал(а): so isoloader can play both ?
Yes of course.
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 31.12.2018 15:11
I success to convert the .cdi version of F355 challenge with rear view and 16/9 widescreen hacks.
The binhack change only (and it's already great !) the 1ST_READ.BIN and IP.BIN but sometimes the start lba is also write in others .bin of the game.
Now I understand better, I wish to try that with some cdda games :-)
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 27.01.2019 03:20
I try to build a gdi from a cdda homebrew, I binhack at 45000 with BINHACK. I try to run and I have "error CD/GD is not an ISO9660" in isoloader
I'm note sure about my ip.bin, what was I do wrong ?
My ip.bin doesn't have TOC at the begining, it's important ? When I binhack it, a lot of data are replaced by 0x00 like the MR image and others thing, I try to binhack it manually at 45000lba replacing the start lba after list of compability zones (US, JAP, and EURO).
Thanks
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 28.01.2019 12:19
The hombrews works only in .iso and not in .cdi.
So probably I have to opt my gdi.
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 30.01.2019 15:22
I descramble the 1ST_READ.BIN and I BINHACK at 45000lba, for ip.bin I copy the boot area from an other game (evil twin) because the BINHACK remove a lot of things and replace them by 0x00... and the game don't boot.
Here a picture of the patch for ip.bin :
https://image.noelshack.com/fichiers/2019/05/3/1548847176-ip-bin.png
The gdi of my homebrew run ! Only with sdcard mod but it run :-) Unfortunately the cdda doesn't works anyway... the cdda lba is reading only from disc.gdi or I have to change something elsewhere ?
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 04.02.2019 13:39
I patch my gdi homebrew in order to play it with hdd and try to use the dma for cdda.
Same result black screen at the first cdda call.
Two issues left, I did something wrong for cdda in ip.bin or/and 1ST_READ.BIN or dreamshell can't play it for now.
There is somethnig to do in particular in those file when you have cdda ?
RE: Convert CDI/GDI in ISO with CDDA - dragoncity - 04.02.2019 13:41
Sometimes black screen because you have CDDA...try without CDDA before for know if the game WORKS in IDE
And after try with CDDA.