+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: Sega Dreamcast (/forum-2.html)
+--- Форум: English section (/forum-29.html)
+--- Тема: Convert CDI/GDI in ISO with CDDA (/thread-3115.html)
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 04.02.2019 16:16
I did. It works well but without cdda it's not necessary to change the format in gdi. the .iso is easier. Thanks for your patch :-).
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 06.02.2019 02:44
I try to convert sturmwind in gdi and opt, finally I patch it for ide.
I have black screen after the memory card check...
RE: Convert CDI/GDI in ISO with CDDA - megavolt85 - 06.02.2019 03:50
sturmwind have few protections
RE: Convert CDI/GDI in ISO with CDDA - fafadou - 06.02.2019 13:19
Yeah, you're right but it runs with dreamshell RC3, and I hope trying a new format will be helpfull for RC4, but it looks not...
Do you have any idea why ?
With sd card I have only a black screen
I patch the game for ide (replace E4745FA0 -> EC745FA0 in 1ST_READ.BIN I found only 1 occurence maybe there is more ? dragoncity ?) Maybe I kept a protections that was remove...
Then set loader 0x8c000100, boot via IP.BIN and OS homebrew
with ide.bin 0.6.1 in gdi and opt format dma or not, cdda or not, synchro true (when attempt in dma), 16 or 8
with ide.bin 0.6.3 gdi and opt nodma, no cdda synchro 16 or 8
and black screen in loading after checking memory card menu.
It's strange for because the 0.6.3 is very smaller than ide.bin from dreamshell RC3.
Maybe with 0.6.6x beta I didn't try. Or else it's possible to run the ide.bin from RC3 to RC4 ?
I think there is something that could help you in this RC3 ide.bin there was remove or changed in RC4 ide.bin.