+- DC-SWAT Forum (http://www.dc-swat.ru/forum)
+-- Форум: Sega Dreamcast (/forum-2.html)
+--- Форум: English section (/forum-29.html)
+--- Тема: Yet another problem with an IDE to SATA (/thread-3749.html)
Yet another problem with an IDE to SATA - fedeuy - 08.08.2020 00:17
hi everyone, ive just got my startech ide to sata adapter, and after many tries (normal hdd,ssds, ect), the result is the same, boot loader stops at checking for G1 ATA devices, i can press start, but nothing happens.
Adapter is set as slave, and the system works if i use and IDE hdd.
Any help would be greatly appreciated.
RE: Yet another problem with an IDE to SATA - fafadou - 08.08.2020 17:13
With my ssd, I must re-plug in sometimes.
Else try to add, the DS folder the IGR folder, and the DS_CORE.BIN in root step by step or remove them if they are already there.
defragment your ssd.
Remove the pin 1, if you had wired it.
RE: Yet another problem with an IDE to SATA - fedeuy - 08.08.2020 22:52
(08.08.2020 17:13)fafadou писал(а): With my ssd, I must re-plug in sometimes.Hi, thanks for the reply, i only have a DS and a GDI folder, and DS_CORE.BIN is inside DS, whats this IGR folder?
Else try to add, the DS folder the IGR folder, and the DS_CORE.BIN in root step by step or remove them if they are already there.
defragment your ssd.
Remove the pin 1, if you had wired it.
RE: Yet another problem with an IDE to SATA - ArturRGT - 09.09.2020 18:54
(08.08.2020 00:17)fedeuy писал(а): hi everyone, ive just got my startech ide to sata adapter, and after many tries (normal hdd,ssds, ect), the result is the same, boot loader stops at checking for G1 ATA devices, i can press start, but nothing happens.
Adapter is set as slave, and the system works if i use and IDE hdd.
Any help would be greatly appreciated.
Maybe it is the same problem i was having. Check out this thread:
http://www.dc-swat.ru/forum/thread-3656.html