ISO Loader 0.7.x Beta

[dragoncity]

San Francisco Rush 2049 (Rush 2049) "Prototype" work if you want for the moment.

> 0x8cfe8000

[pcwzrd13]

(23.02.2019 22:26)dragoncity писал(а):  San Francisco Rush 2049 (Rush 2049) "Prototype" work if you want for the moment.

That's ok. I can use the old loader if I want to play it. I actually have the old loader on my SD card and the new one on my CF so I can easily switch between the two loaders. I was just wondering if Megavolt knew what the issue was with the GDI.

[RazorX2018]

i've just tried booting stupid invaders eu and all i get is a black screen, anyone know how to fix this?

[megavolt85]

(23.02.2019 22:28)pcwzrd13 писал(а):  I was just wondering if Megavolt knew what the issue was with the GDI.

yes, i know. same problem as Evil Twin
i'm research is letter, now i'm find error for Alone in the Dark

RazorX2018 it's alredy work, i'm upload new loader when create fix for Alone in the Dark or Evil Twin

[aldair]

(23.02.2019 23:28)megavolt85 писал(а):  

(23.02.2019 22:28)pcwzrd13 писал(а):  I was just wondering if Megavolt knew what the issue was with the GDI.

yes, i know. same problem as Evil Twin
i'm research is letter, now i'm find error for Alone in the Dark

RazorX2018 it's alredy work, i'm upload new loader when create fix for Alone in the Dark or Evil Twin

Test Drive 6 works for a while, then freezes the screen on rc4.

[dragoncity]

@pcwzrd13
Do you use an IDE CABLE ATA133 "AWG32"?

During my tests in IDE/CF/SATA/SSD I noticed that the ATA100 IDE cable didn't boot some games.
A little like on "Xbox 1" or if you don't put an ATA133 IDE cable, you have problems, well the same.

That is why it is very important to use a PCB for me to put an ATA133 "AWG32" IDE cable.
(ATA133 AWG30 it's random..so use AWG32)

or the best thing is not to use an ide cable !

[pcwzrd13]

(24.02.2019 15:28)dragoncity писал(а):  @pcwzrd13
Do you use an IDE CABLE ATA133 "AWG32"?

During my tests in IDE/CF/SATA/SSD I noticed that the ATA100 IDE cable didn't boot some games.

I don't know what the wire gauge is but I haven't run into any problems booting games. Everything that should boot, boots fine.

[RazorX2018]

can anyone help me figure this out please, i bought an 44 pin ide to msata board because i want to replace my 44 pin 250gb ide hdd in the dreamcast but it doesn't get past the boot loader screen.

here's the board:


here is where it gets stuck:



i'm currently using the boot_loader_devkit.bios

[pcwzrd13]

(24.02.2019 21:43)RazorX2018 писал(а):  can anyone help me figure this out please, i bought an 44 pin ide to msata board because i want to replace my 44 pin 250gb ide hdd in the dreamcast but it doesn't get past the boot loader screen.

DreamShell most likely just doesn't like the adapter. It's very picky about using any sort of adapter (CF, SATA, etc.). I don't know if anyone has successfully used an mSATA adapter with DreamShell before.

[dragoncity]

Boot Dreamshell with SD MOD (or Dongle),and put only your games in your HDD.
With this configuration :
- Boot without problem
- Presets work
- Better stability for dreamshell,no crash etc...

As said "pcwzrd13" it is also possible that this is the adapter,I never tested in mSATA.

---

Try remove Pin 1

[megavolt85]

WTF, it's crazy. San Francisco Rush 2049 can't find my joystik

[RazorX2018]

(25.02.2019 00:03)dragoncity писал(а):  Boot Dreamshell with SD MOD (or Dongle),and put only your games in your HDD.
With this configuration :
- Boot without problem
- Presets work
- Better stability for dreamshell,no crash etc...

As said "pcwzrd13" it is also possible that this is the adapter,I never tested in mSATA.

---

Try remove Pin 1

i can get into dreamshell using an sd card but the hdd doesn't show up in dreamshell despite it being detected by the boot loader

[dragoncity]

Like i said before try remove Pin 1.

[RazorX2018]

(25.02.2019 01:21)dragoncity писал(а):  Like i said before try remove Pin 1.

well i have to goto work so i will have to try again in the morning but i suspect as you said it may not like the adaptor

[megavolt85]

(25.02.2019 00:03)dragoncity писал(а):  Try remove Pin 1

look this

he added capacity 400-500 pf between grounding and reset

[MilkeyWilkey]

done some testing on not working games from dragoncity's site
all games tested with RGB unless noted, memory address 004000.

Sega Worldwide Soccer 2000 - Euro Edition v1.030 (2000)(Sega)(PAL)(M4)[!] - works
AeroWings 2 - Airstrike v1.001 (2000)(Crave)(NTSC)(US)[!] - Black screen after name choice
Floigan Bros. - Episode 1 v1.001 (2001)(Sega)(NTSC)(US)[!] - works
NBA 2K v1.008 (1999)(Sega)(NTSC)(US)[!][1S 51004] - works in composite/VGA, black screen in RGB after cinematics
NBA 2K1 v1.008 (2000)(Sega)(NTSC)(US)[!][1S 51063] - works
NBA 2K2 v1.000 (2001)(Sega)(NTSC)(US)[!][1S 51178] - works
NCAA College Football 2K2 - Road to the Rose Bowl v1.003 (2001)(Sega)(NTSC)(US)[!][2S 51176] - works
NFL 2K v1.007 (1999)(Sega)(NTSC)(US)[!][9S 51003] - works in composite/VGA, black screen in RGB after cinematics
NFL 2K v1.007 (1999)(Sega)(NTSC)(US)[!][610-7895-0444 MT B08, B13, B19, B20] - works in composite/VGA, black screen in RGB after cinematics
NFL 2K1 v1.003 (2000)(Sega)(NTSC)(US)[!][4S 51062B] - works
NFL 2K2 v1.004 (2001)(Sega)(NTSC)(US)[!][2S 51168] - works
NFL Blitz 2000 v1.002 (1999)(Midway)(NTSC)(US)[!] - Doesn't Work
NFL Blitz 2000 v2.000 (1999)(Midway)(NTSC)(US)[!] - Doesn't Work
NHL 2K v1.000 (2000)(Sega)(NTSC)(US)[!] - works
NHL 2K2 v1.008 (2002)(Sega)(NTSC)(US)[!] - works with IP.BIN
Vampire Chronicle for Matching Service v1.003 (2000)(Capcom)(NTSC)(JP)(en)[!] - Doesn't Work

[megavolt85]

NFL Blitz 2000 v2.000 (1999)(Midway)(NTSC)(US)[!] работает если перед запуском переключиться на сеговский биос, надо будет сделать патч чтоб не париться с переключением

[EduardoKmus]

Friends, excuse my ignorant question ... but why does iso_loader sometimes not optimize the GDI? A console window appears and closes very quickly, but the optimization process does not begin. Has it happened to you before?

By.KmusDC
My Youtube Channel: https://www.youtube.com/channel/UCsCCWeR...subscriber

[megavolt85]

may be long file name or gdi with not standart filenames

[fafadou]

@MilkeyWilkey : nfl blitz works with loader 0.6.3 it's a very small loader without cdda and dma, but probably the size of loader is important.