DreamShell v4.0.1 Release

[SWAT]

(05.01.2025 23:26)fafadou писал(а):  An interesting video comparing gdemu and last dreamshell version with gta 3 :
https://www.youtube.com/watch?v=R4THiD0j...=KmusRetro

I don't know if his dreamshell stuff is the more efficient, probably now dreamshell is sending/reading datas as fast as the mother board can handle.

For a fair comparison, you need to use a CF card (or at least SSD). Because GDEmu has flash memory with fast access, while HDD access is not as fast. But CF will win them all. Also SSD.

[SWAT]

(06.01.2025 10:44)Elgor4uk писал(а):  

(05.01.2025 08:01)SWAT писал(а):  Приводом прошивать BIOS это конечно малость вводит в заблуждение )
Неважно с чего ты загрузился. Сделай скриншот ошибки из консоли.
И кстати можешь попробовать через консоль это сделать?
https://github.com/DC-SWAT/DreamShell/bl...dule.c#L16

1. В общем, не стал я мучить и без того старенький привод консольными командами. Но протестировал более раннюю версию образа DreamShell_v4.0.0_Release.cdi от 2024_02_03 с версией v2.6 записанного на CD-r Verbatim и данный образ успешно прошивает микросхемы BIOS.

2. Есть ли какой то ресурс записи у микросхемы BIOS? Перезаписывал десяток раз во время тестов на одну и туже микросхему и теперь появились переживания что она выйдет из строя. MX29F1610A VA0.

1. Очень странно, буду разбираться.
2. Да за 10 раз ничего с ней не будет.

[SWAT]

I rebuilt the release on GCC 13.2 instead of 14.2, as it should have been (forgot to switch after GTA3). Try it and check issues like Quake 3. I hope they go away.
https://github.com/DC-SWAT/DreamShell/re....1.Release

[rpf16rj]

(07.01.2025 19:13)SWAT писал(а):  I rebuilt the release on GCC 13.2 instead of 14.2, as it should have been (forgot to switch after GTA3). Try it and check issues like Quake 3. I hope they go away.
https://github.com/DC-SWAT/DreamShell/re....1.Release

Thanks, SWAT, Quake 3 is ok now with default settings and cdda TMA1.
I'll do tests with other games and back results.

[jeisonpsp]

(Вчера 01:35)rpf16rj писал(а):  

(07.01.2025 19:13)SWAT писал(а):  I rebuilt the release on GCC 13.2 instead of 14.2, as it should have been (forgot to switch after GTA3). Try it and check issues like Quake 3. I hope they go away.
https://github.com/DC-SWAT/DreamShell/re....1.Release

Thanks, SWAT, Quake 3 is ok now with default settings and cdda TMA1.
I'll do tests with other games and back results.

Hola amigo me podrías decir la configuración que utilizaste para quake 3?
Movi la configuración default y el juego no me carga.

Gracias.

[rpf16rj]

(Вчера 02:27)jeisonpsp писал(а):  

(Вчера 01:35)rpf16rj писал(а):  

(07.01.2025 19:13)SWAT писал(а):  I rebuilt the release on GCC 13.2 instead of 14.2, as it should have been (forgot to switch after GTA3). Try it and check issues like Quake 3. I hope they go away.
https://github.com/DC-SWAT/DreamShell/re....1.Release

Thanks, SWAT, Quake 3 is ok now with default settings and cdda TMA1.
I'll do tests with other games and back results.

Hola amigo me podrías decir la configuración que utilizaste para quake 3?
Movi la configuración default y el juego no me carga.

Gracias.

Quake 3 worked with default settings without changing any config on iso loader.
DMA, Async True, Emulate CDDA, IRQ, Direct, Fast boot, 0x8c001100 and TMU1 on CDDA tab.

---

(07.01.2025 19:13)SWAT писал(а):  I rebuilt the release on GCC 13.2 instead of 14.2, as it should have been (forgot to switch after GTA3). Try it and check issues like Quake 3. I hope they go away.
https://github.com/DC-SWAT/DreamShell/re....1.Release

Quake 3 now ok!
Sega Rally 2, Mortal Kombat Gold still black screen on boot.

[rpf16rj]

I got run Mortal Kombat Gold download from here:
http://www.dc-swat.ru/forum/thread-3851.html

[jeisonpsp]

(Вчера 03:26)rpf16rj писал(а):  

(Вчера 02:27)jeisonpsp писал(а):  

(Вчера 01:35)rpf16rj писал(а):  

(07.01.2025 19:13)SWAT писал(а):  I rebuilt the release on GCC 13.2 instead of 14.2, as it should have been (forgot to switch after GTA3). Try it and check issues like Quake 3. I hope they go away.
https://github.com/DC-SWAT/DreamShell/re....1.Release

Thanks, SWAT, Quake 3 is ok now with default settings and cdda TMA1.
I'll do tests with other games and back results.

Hola amigo me podrías decir la configuración que utilizaste para quake 3?
Movi la configuración default y el juego no me carga.

Gracias.

Quake 3 worked with default settings without changing any config on iso loader.
DMA, Async True, Emulate CDDA, IRQ, Direct, Fast boot, 0x8c001100 and TMU1 on CDDA tab.

---

(07.01.2025 19:13)SWAT писал(а):  I rebuilt the release on GCC 13.2 instead of 14.2, as it should have been (forgot to switch after GTA3). Try it and check issues like Quake 3. I hope they go away.
https://github.com/DC-SWAT/DreamShell/re....1.Release

Quake 3 now ok!
Sega Rally 2, Mortal Kombat Gold still black screen on boot.

Gracias ahora me funciona quake 3

---

Edit.

En Bangai-O hay un cuelgue al salir de las opciones.