ISO Loader 0.8.x Beta + preview of DreamShell v4.0 RC 5

[MastaG]

(13.12.2022 12:49)SWAT писал(а):  

(13.12.2022 12:44)MastaG писал(а):  Thanks again
Unfortunately I still can't get Shenmue1 and Crazy Taxi1 working.
I've tried 0x8c000100, 0x8cfe0000, 0x8cfe8000 and low-level (DMA on, No CDDA, No IRQ).
They always hang on the screen where you see a picture of the disc and it says "Executing...".

I use Shenmue US, it's works well Try my images: https://drive.google.com/drive/folders/1...sp=sharing
About low-level, do you have this file on your device - /DS/firmware/isoldr/syscalls.bin ?

Edit:
New settings for Quake 3 Arena: DMA true async, IRQ, CDDA mode DMA_TMU1, address 0x8c001100

My point is not only to fix CDDA, but also to make sure that this loader replaces all other versions of loader. Otherwise, it is impossible to add new features to them or fix some, old versions will be as is forever.
There are two main things left to fix for the release. It is WinCE without low-level mode and VMU emulation. Other seems to be fine for me now.

Yes I have /DS/firmware/isoldr/syscalls.bin because with each release I first remove the old "DS" folder from my CF card before copying the new one.

Quake3 works wonderfully with your settings ! (need keyboard and mouse and I'll kick ya'll asses )

Unfortunately my Dreamcast seems to be unable to play Shenmue with your new loader.
I've tried your copies and verified that 0 files are fragmented.
DMA + 0x8cfe0000 or 0x8cfe8000 with "auto heap" or "before loader heap" and IRQ both enabled and disabled... always stuck on "Executing...".
It's strange because it works fine with 0.7 loader...

I'll open up my Dreamcast soon and re-check proper ground wires again.