DC freezing after mounting G1-ATA

[Nold]

Hi,

i'm recently working on a DC-Portable & tried to connect a CF-Card to the DC using a IDE2CF Adapter. After fixing the adapter by removing a short on the Master-/Slave-Jumper (factory made -.-) my DC successfully mounts the Filesystem! But then freezes...

Doesn't matter if with-/out SD-Card.

I use NOgdrom-Bios, have no GD-ROM connected, but attached AICA-Clock like this:

Spoiler (Click to View)

I could try attaching a active-crystal, but it shouldn't matter for this mod, since it's only required for the AICA..

Here is a screenshot of the bootloader:

Spoiler (Click to View)

  ds_freeze_g1ata.JPG (Размер: 447.94 Кб / Загрузок: 108)


Thanks a lot.

[megavolt85]

press START in boot loader and boot with button A
check this witth button B, X and Y

[Nold]

(29.01.2018 21:38)megavolt85 писал(а):  press START in boot loader and boot with button A
check this witth button B, X and Y

That's working O.o ... so this issue is known & will be fixed?

[megavolt85]

yes

[jacobsson]

(30.01.2018 01:15)megavolt85 писал(а):  yes

Oh, wow, I didn't know this!
I almost threw my my XCDIY-adapter in the trash.

Thanks!