ISO Loader 0.7.x Beta

[aldair]

(02.04.2019 22:00)megavolt85 писал(а):  Spec Ops, now problem when you fire

Can you make gnuboy in gdi?
Using the same theme and the roms of this cdi below:





Download:
https://www.4shared.com/rar/fHHHts1V/GunboyDC.html

[sonik]

megavolt85 thanks for this updated version!
A lot of games now boot and run.

I was testing it and found out that some games crash when running.
Crazy Taxy 2 for example crash if you let it running the demo mode for about 30 minutes. It starts to run missing some textures than crash.
Soul Calibur crash after about an hour of playing.
THPS sometimes crashs at the loading screens.
Other games crashs randomly.
Anyone with the same problem?

Also, I have a NTSC console and some games now are running in PAL-50.

[fafadou]

Have you the same thing with previous version of loader (0.6.1 or 0.6.6x ?)

[sonik]

0.6.1 works fine. Been using it for a long time.

[fafadou]

Ok there is probably something different in 0.7.x that may help.

[sonik]

Looks like the old version have the same problem. Only took way longer.
Leaved crazy taxi 2 running for 3 hours using the old loader. it crashed. Tested again for for than 3 hours. Crashed.
Anyone can do this test too?
My setup is: DC with bios mod without gddrive. using sata disc. Tested with one mechanical and one solid state drive.

[megavolt85]

if you remove GDROM and don't use +12V then you have same problem as with GDEMU, need fix your PSU

(08.04.2019 16:12)aldair писал(а):  Can you make gnuboy in gdi?

my internet very slow
Next month to me will connect the fast Internet and I will be able to unload files of the big size

[Zychion]

Hi guys.
Just wanted to say "Thank You" to Megavolt for his continues support of Dreamshell. I've just finished doing an IDE mod myself and am going through the process of creating my own CFG files with the help of Dragoncity's presets.
I should probably mention that I have some of the similar faults to what Dragoncity is seeing with the VC games. I have an Australian PAL dreamcast. I've soldered the Dual Bios + IDE mod myself. I am then using a IDE to Sata adapter with pin1 cleanly cut off. I'm not using SD at all but I do have one in my house so all my presets are running on internal Sata SSD.
So I can agree that Flogian Bros, Ooga Booga and NBA2K2 do not work on a internal Sata SSD without SD Card. However NHL2K2 being my favourite game, I have tried that a lot and that does work. I haven't tried NFL2K2 and WSB2K2 yet.
If I can be of any other assistance (mostly for PAL console testing I imagine) I'd be happy to help.

[fafadou]

@ aldair : Can you make gnuboy in gdi?

Have you a link for the game somewhere please ? Maybe I can do it.
I have some difficulties with "geist force" but I can build some gdi like I've done for "flasback" and others games easier to convert in gdi.

[aldair]

(23.04.2019 11:59)fafadou писал(а):  @ aldair : Can you make gnuboy in gdi?

Have you a link for the game somewhere please ? Maybe I can do it.
I have some difficulties with "geist force" but I can build some gdi like I've done for "flasback" and others games easier to convert in gdi.

https://www.4shared.com/rar/fHHHts1V/GunboyDC.html

[fafadou]

This link contain some virus...
could you share via an other way (mega.nz for example).

[sonik]

(23.04.2019 00:26)megavolt85 писал(а):  if you remove GDROM and don't use +12V then you have same problem as with GDEMU, need fix your PSU

Can you explain this please?
I don't know about the problem with 12V.

[megavolt85]

(24.04.2019 18:22)sonik писал(а):  plain this please?

all GDEMU users have problem with PSU. +12V use only by GDROM, GDEMU don't use +12V
when you remove GDROM your PSU overheat after few hours

if you don't use RGB-SCART then use this for fix

[aldair]

(24.04.2019 12:37)fafadou писал(а):  This link contain some virus...
could you share via an other way (mega.nz for example).

Download: https://mega.nz/#!K3JljATa!AsL-RMV3UmRFo...m2kkhXkOmg

[sonik]

(24.04.2019 19:16)megavolt85 писал(а):  

(24.04.2019 18:22)sonik писал(а):  plain this please?

all GDEMU users have problem with PSU. +12V use only by GDROM, GDEMU don't use +12V
when you remove GDROM your PSU overheat after few hours

if you don't use RGB-SCART then use this for fix

Thanks!
I use rgb-scart. Will look what can be done to my PSU.

[fafadou]

Please aldair try this :-) :
https://mega.nz/#!wiRj2QTQ!6pG4nNhiAJdEP...0_AwN5IaMA


@megavolt : I'm just looking for your pier solar hd data and what a great work !
Please explain more :
Have you descramble the 17.DAT in 1ST_READ.BIN and patch it ?
Add a pvr image for disc or already exist ?
Convert the 18.DAT to 00.DAT and 00.MPG ?
Congratulations.

[megavolt85]

(27.04.2019 16:20)fafadou писал(а):  Have you descramble the 17.DAT in 1ST_READ.BIN and patch it ?

yes

(27.04.2019 16:20)fafadou писал(а):  Add a pvr image for disc or already exist ?

i'm create from users photo

(27.04.2019 16:20)fafadou писал(а):  Convert the 18.DAT to 00.DAT and 00.MPG ?

no, 00.DAT and 00.MPG extracted from hidden part of image

[aldair]

Please aldair try this :-) :
https://mega.nz/#!wiRj2QTQ!6pG4nNhiAJdEP...0_AwN5IaMA

(27.04.2019 16:20)fafadou писал(а):  Add a pvr image for disc or already exist ?

PVR Tool Pack v1.0 by SWAT
Win32
Download.

PVR GNUboy

[fafadou]

I patch the emulator for hdd, it runs with demul...

Have you run with homebrew OS in set menu ?

I can share also the sd version maybe it will better.

I'll add the pvr, thanks

[gilvan999]

Getting to solve my HD did not recognize because of SOURCE I put a pc source now the HD works normal. Just a question why does every game load like it's PAL games? my Dreamcast is NTSC and even loading NTSC games the screen gets cut like it was wheel at 50HZ. One more thing the Solar pier showed failed to load. Congratulations for the great work this incredible new loader.

EDIT: Solar Pier ran perfect after I rebooted the Dreamcast.