ISO Loader 0.7.x Beta

[pcwzrd13]

I noticed a bug with Soldier of Fortune (this happened on the previous loader as well). Any time you go through a door, the door texture will appear and disappear randomly. Not a game-breaking bug by any means but figured I'd mention it. Maybe it can be fixed.

Example at 27:35 in my video here:

[megavolt85]

pcwzrd13, this is a problem with the timer, unfortunately I have not yet solved this problem
when I decide it compatibility will be about 99.8%
almost all not working games require proper timer settings

[pcwzrd13]

(05.03.2019 21:26)megavolt85 писал(а):  pcwzrd13, this is a problem with the timer, unfortunately I have not yet solved this problem
when I decide it compatibility will be about 99.8%
almost all not working games require proper timer settings

Ah ok. So any minor bugs or glitches that might be in games would likely be caused by this? Do you think this might be the issue with PSO or would that be something else?

[megavolt85]

(05.03.2019 22:18)pcwzrd13 писал(а):  Ah ok. So any minor bugs or glitches that might be in games would likely be caused by this?

yep.
I experimented with the value of the timer and sometimes it led to glitches
I don't understand why this happens, the game always reinstalls the timer without reading its initial value.

(05.03.2019 22:18)pcwzrd13 писал(а):  Do you think this might be the issue with PSO or would that be something else?

I'm definitely not sure, but maybe yes

[gilvan999]

(05.03.2019 00:28)dragoncity писал(а):  

(03.03.2019 19:44)gilvan999 писал(а):  my 80GB hd is LBA 28 does not work. I turned on the 320GB hard drive not Boot is on this screen stopped.
any HD that connects from LBA 48 hangs on that boot screen, any idea what it can be?
https://ibb.co/z43x6Pp

Have you solder ground (GND)?

Yes

[pcwzrd13]

Played some Planet Ring tonight and noticed some really strange bugs. Possibly timer related? In Ball Bubble, there were a lot of "Synch Errors" which would cause the board to reset. It was playable but a bit annoying. lol The weirdest bug I noticed was in Splash though. The game would say that I sunk my opponent's ship when I didn't even hit him. No problems with the other two games though.

[OmegaDrive]

I've been testing my game library though this version of the ISO Loader and I've found Segagaga and Puyo Puyo Fever now work compared to the 0.6 version. However, Sonic Adventure 2 (NTSC-J) no longer boots and freezes on a black screen immediately after loading. I've tested multiple dumps of the game from GD Ripper including the NTSC-U version and verified them against the TOSEC and Redump databases and made sure the original pre-optimized GDI dumps work in Demul and IxDream and sadly it refuses to boot through the ISO Loader.

Does run fine through the GD-Player from the original GD-ROM disc though.

[riciasd3d]

Hi!

Thanks for the hard work .

One question, is it possible to use the "ide.bin" version as "sd.bin" to load games from my SD card?

Thanks

[Mu.]

(09.03.2019 01:11)riciasd3d писал(а):  Hi!

Thanks for the hard work .

One question, is it possible to use the "ide.bin" version as "sd.bin" to load games from my SD card?

Thanks

Unfortunately not, this is designed specifically for loading games from an IDE source.

[megavolt85]

(08.03.2019 22:29)OmegaDrive писал(а):  However, Sonic Adventure 2 (NTSC-J) no longer boots and freezes on a black screen immediately after loading.

thank you for test. i'm check SA2, may be this game have protections

(09.03.2019 01:11)riciasd3d писал(а):  One question, is it possible to use the "ide.bin" version as "sd.bin" to load games from my SD card?

no, i'm write loader only for IDE
The possibilities of the SD card are very limited, you should not wait for an improvement for this mod

[pcwzrd13]

(09.03.2019 16:55)megavolt85 писал(а):  

(08.03.2019 22:29)OmegaDrive писал(а):  However, Sonic Adventure 2 (NTSC-J) no longer boots and freezes on a black screen immediately after loading.

thank you for test. i'm check SA2, may be this game have protections

Same for me. The US version doesn't boot either.

[megavolt85]

pcwzrd13 only US? PAL tested?

[pcwzrd13]

(09.03.2019 18:43)megavolt85 писал(а):  pcwzrd13 only US? PAL tested?

Just tested the PAL version. Same result. Must be BIOS protection.

[megavolt85]

(09.03.2019 19:29)pcwzrd13 писал(а):  Must be BIOS protection.

yes, apply patch for PSO, is same protection

Spoiler (Click to View)

  Снимок экрана_2019-03-09_18-49-17.png (Размер: 6.03 Кб / Загрузок: 1220)

[megavolt85]

added patch for Sonic Adventure 2
removed region from PSO patch, it's work for all regions

[pcwzrd13]

(09.03.2019 20:19)megavolt85 писал(а):  added patch for Sonic Adventure 2
removed region from PSO patch, it's work for all regions

That worked! Thanks!

[gilvan999]

is there the possibility of leaving a version 0.7x compatible with HD 80gb? my 200GB HDD and 320GB IDE does not work in this current version.

[fafadou]

Normally it must works if it worked with previous version.

Have you defragmented your HDD ?

[gilvan999]

(10.03.2019 01:53)fafadou писал(а):  Normally it must works if it worked with previous version.

Have you defragmented your HDD ?

Worse than I did not test in the previous version because the 80 GB was good size for me. but with the new version the 80GB does not load the games for being LBA28 so I turned on the other HD bigger and none works, but it was worth the hint I will test those HD in an earlier version. Are the HDs formatted anyway do you need to defragment?

[Mu.]

(10.03.2019 02:38)gilvan999 писал(а):  Worse than I did not test in the previous version because the 80 GB was good size for me. but with the new version the 80GB does not load the games for being LBA28 so I turned on the other HD bigger and none works, but it was worth the hint I will test those HD in an earlier version. Are the HDs formatted anyway do you need to defragment?

The GDIs you use with the loader must NOT be fragmented, the easiest way to ensure this is to set up all of your files in a folder on your PC. Then when you are ready to transfer them, format the drive and then copy them over; the actions of overwriting or moving files on the drive is what causes fragmentation to occur.