Yet another problem with an IDE to SATA

[fedeuy]

hi everyone, ive just got my startech ide to sata adapter, and after many tries (normal hdd,ssds, ect), the result is the same, boot loader stops at checking for G1 ATA devices, i can press start, but nothing happens.
Adapter is set as slave, and the system works if i use and IDE hdd.
Any help would be greatly appreciated.

[fafadou]

With my ssd, I must re-plug in sometimes.
Else try to add, the DS folder the IGR folder, and the DS_CORE.BIN in root step by step or remove them if they are already there.
defragment your ssd.
Remove the pin 1, if you had wired it.

[fedeuy]

(08.08.2020 17:13)fafadou писал(а):  With my ssd, I must re-plug in sometimes.
Else try to add, the DS folder the IGR folder, and the DS_CORE.BIN in root step by step or remove them if they are already there.
defragment your ssd.
Remove the pin 1, if you had wired it.

Hi, thanks for the reply, i only have a DS and a GDI folder, and DS_CORE.BIN is inside DS, whats this IGR folder?

[ArturRGT]

(08.08.2020 00:17)fedeuy писал(а):  hi everyone, ive just got my startech ide to sata adapter, and after many tries (normal hdd,ssds, ect), the result is the same, boot loader stops at checking for G1 ATA devices, i can press start, but nothing happens.
Adapter is set as slave, and the system works if i use and IDE hdd.
Any help would be greatly appreciated.

Maybe it is the same problem i was having. Check out this thread:
http://www.dc-swat.ru/forum/thread-3656.html