Создать ответ 
 
Рейтинг темы:
  • Голосов: 0 - Средняя оценка: 0
  • 1
  • 2
  • 3
  • 4
  • 5
VA0 Bad flash
Автор Сообщение
a500plus Не на форуме
Новичок
*

Сообщений: 3
Зарегистрирован: 11.09.2024
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #1
VA0 Bad flash
Hello All,

I have a JPN VA0
Games like Sonic adventure do not work, the date will not stay (it has a new tested battery).
DC check disk fails instantly to a red screen. I do not have black swirl, but I understand I have a very early DC where i think region is kept on bios.

The first guide i found was dragoncity using retro dream. No version of retro dream will boot.
V2 hangs on splash => checking harddrive
v3 hangs on splash
I tried all versions of Dreamshell, they all hang on "G1-ata" during initial load, until i go all the way back to 4rc1 = which loads fine. 4 beta also loads ok. This DC has never been modded. I have an SD adapter.

After much testing I strongly think the flash is corrupt. I read a lot here and other forums & soldered 12v => R512 and "flashrom_tool.bin" I found on here reports that it is RW

I have tried restoring backup from VMU -> no change via region changer 1.5
I have tried making LUA script on dreamshell 4RC1
os.execute("flashrom -write 0 131072 /sd/DS/shared/flash/dcjp_ntsc.bin")
flashrom errors that it can not open 131072

Im running out of ideas.

Thanks
28.09.2024 00:14
Найти все сообщения Цитировать это сообщение
Elgor4uk Не на форуме
Пользователь
**

Сообщений: 75
Зарегистрирован: 20.10.2023
Рейтинг: 2
Сказал спасибо: 64
Поблагодарили 16 раз(а) в 10 сообщ.
Сообщение: #2
RE: VA0 Bad flash
(28.09.2024 00:14)a500plus писал(а):  Hello All,

I have a JPN VA0
Games like Sonic adventure do not work, the date will not stay (it has a new tested battery).
DC check disk fails instantly to a red screen. I do not have black swirl, but I understand I have a very early DC where i think region is kept on bios.

The first guide i found was dragoncity using retro dream. No version of retro dream will boot.
V2 hangs on splash => checking harddrive
v3 hangs on splash
I tried all versions of Dreamshell, they all hang on "G1-ata" during initial load, until i go all the way back to 4rc1 = which loads fine. 4 beta also loads ok. This DC has never been modded. I have an SD adapter.

After much testing I strongly think the flash is corrupt. I read a lot here and other forums & soldered 12v => R512 and "flashrom_tool.bin" I found on here reports that it is RW

I have tried restoring backup from VMU -> no change via region changer 1.5
I have tried making LUA script on dreamshell 4RC1
os.execute("flashrom -write 0 131072 /sd/DS/shared/flash/dcjp_ntsc.bin")
flashrom errors that it can not open 131072

Im running out of ideas.

Thanks

1. Retrodream 3.2 on VA0 Japan only works with GDrom installed.
2. Retrodream 3.1 works without GDrom, but many games freeze at startup.
3. Maybe your problem is related to the SD adapter and installing the IDE mod will help solve the problem.
28.09.2024 18:55
Найти все сообщения Цитировать это сообщение
a500plus Не на форуме
Новичок
*

Сообщений: 3
Зарегистрирован: 11.09.2024
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #3
RE: VA0 Bad flash
Thanks for your help.

For info I have a working gd ROM drive. Its installed. Its a very unmodded Dreamcast. I have tried the full cd version of dreamshell and it hangs in the same place .
28.09.2024 21:54
Найти все сообщения Цитировать это сообщение
SWAT Не на форуме
Администратор
*******

Сообщений: 7243
Зарегистрирован: 04.01.2005
Рейтинг: 30
Сказал спасибо: 149
Поблагодарили 1216 раз(а) в 764 сообщ.
Сообщение: #4
RE: VA0 Bad flash
(28.09.2024 00:14)a500plus писал(а):  Hello All,

I have a JPN VA0
Games like Sonic adventure do not work, the date will not stay (it has a new tested battery).
DC check disk fails instantly to a red screen. I do not have black swirl, but I understand I have a very early DC where i think region is kept on bios.

The first guide i found was dragoncity using retro dream. No version of retro dream will boot.
V2 hangs on splash => checking harddrive
v3 hangs on splash
I tried all versions of Dreamshell, they all hang on "G1-ata" during initial load, until i go all the way back to 4rc1 = which loads fine. 4 beta also loads ok. This DC has never been modded. I have an SD adapter.

After much testing I strongly think the flash is corrupt. I read a lot here and other forums & soldered 12v => R512 and "flashrom_tool.bin" I found on here reports that it is RW

I have tried restoring backup from VMU -> no change via region changer 1.5
I have tried making LUA script on dreamshell 4RC1
os.execute("flashrom -write 0 131072 /sd/DS/shared/flash/dcjp_ntsc.bin")
flashrom errors that it can not open 131072

Im running out of ideas.

Thanks

For write setting size doesn't needed:
PHP код:
os.execute("flashrom -write 0 /sd/DS/shared/flash/dcjp_ntsc.bin"

[Изображение: barbers.png]
30.09.2024 14:13
Вебсайт Найти все сообщения Цитировать это сообщение
a500plus Не на форуме
Новичок
*

Сообщений: 3
Зарегистрирован: 11.09.2024
Рейтинг: 0
Сказал спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщ.
Сообщение: #5
RE: VA0 Bad flash
(30.09.2024 14:13)SWAT писал(а):  
(28.09.2024 00:14)a500plus писал(а):  Hello All,

I have a JPN VA0
Games like Sonic adventure do not work, the date will not stay (it has a new tested battery).
DC check disk fails instantly to a red screen. I do not have black swirl, but I understand I have a very early DC where i think region is kept on bios.

The first guide i found was dragoncity using retro dream. No version of retro dream will boot.
V2 hangs on splash => checking harddrive
v3 hangs on splash
I tried all versions of Dreamshell, they all hang on "G1-ata" during initial load, until i go all the way back to 4rc1 = which loads fine. 4 beta also loads ok. This DC has never been modded. I have an SD adapter.

After much testing I strongly think the flash is corrupt. I read a lot here and other forums & soldered 12v => R512 and "flashrom_tool.bin" I found on here reports that it is RW

I have tried restoring backup from VMU -> no change via region changer 1.5
I have tried making LUA script on dreamshell 4RC1
os.execute("flashrom -write 0 131072 /sd/DS/shared/flash/dcjp_ntsc.bin")
flashrom errors that it can not open 131072

Im running out of ideas.

Thanks

For write setting size doesn't needed:
PHP код:
os.execute("flashrom -write 0 /sd/DS/shared/flash/dcjp_ntsc.bin"

Thanks. When I do this. There's no error message , a slight delay and then nothing in console . The flash is no different as far as I can see.
01.10.2024 00:43
Найти все сообщения Цитировать это сообщение
Создать ответ 


Похожие темы
Тема: Автор Ответов: Просмотров: Посл. сообщение
  Compact flash to Micro SD Activity LED Toe-Knee 29 32960 22.11.2021 14:16
Посл. сообщение: Toe-Knee
  Ok to use 3v flash chip on VA0 board? Poknatus 5 18208 21.04.2018 19:15
Посл. сообщение: thameslink
  SD card Dreamcast(bios flash) aldair 2 11092 11.06.2017 20:56
Посл. сообщение: SWAT
  two flash chips and remove original bios johnriper 8 36633 30.08.2015 14:40
Посл. сообщение: megavolt85
  bios FLASH manotroll 3 18808 12.09.2010 18:25
Посл. сообщение: SWAT

Переход:


Пользователи просматривают эту тему: 1 Гость(ей)