Compatibility Dreamcast Japan Problem

[swordeye]

HELP! I have properly burned a dreamshell rc1 but doesn't work with my dreamcast NTSC-J console! Also, I have problems with the sd mod to serial pinout, where should i solder the ground in the dreamcast? Your help would be of great help!
Sir SWAT I need your help badly please....
please thank you very much!

[SWAT]

Try first beta 4.

[swordeye]

(14.03.2013 09:57)SWAT писал(а):  Try first beta 4.

"sir swat thanks for the advice...please pardon me but I still have to more questions if you dont mind:
1. in the sd card serial pinout, where will I solder the ground? is it in the dreamcast motherboard or somewhere else?
2. if I use the sd form dshell beta 4 cd,will it load the dshell sd form rc 1 in the card reader?

thanks in advance for the answer!

[SWAT]

1. Any ground on the motherboard.
2. It makes no sense. If RC1 does not work, then you will only replace by a jumper the resistor RA601 from the motherboard for fixing this. Or connect direct to test points before resistor http://yam.20to4.net/dreamcast/va1.html

[elpedromolina04]

hello swat! in some Japanese dreamcast not boot dreamshell, why can this be?


not read the disc, the dreamshell cd copy, read only original CDs, not read copys

[megavolt85]

only BIOS mod. Bios need flash on programmator or another console

[SWAT]

Your DC with disabled Mil-cd in BIOS? What a revision of motherboard?