DreamShell v4.0.1 Release

[Darkodan]

Thank you both for the welcome!

(Вчера 22:53)fafadou писал(а):  Fat 32, 64ko for clusters.
And welcome of course !

Yes, it was FAT 32 with Kluster 64. I formatted it with MiniTool Partition Wizard and it didn't work, but then I tried formatting it with the Wii Back Up Manager program (a program used to install Wii games), and it worked perfectly.

I don't know if what I'm saying is on another topic, but I'll leave it just in case.

(Сегодня 01:40)MannyMania писал(а):  Welcome!! In case you don't know, Serial is very slow. IDE is the way to go.

I know, but at the moment I only have the SD Card, so I want to experiment more with this adapter.

By the way, I also realized that I need the DreamShell_bootloader_v2.7 disk to boot Dreamshell v4.0.1. So first I'll have to burn a new disk.

[fafadou]

Each disk is good.
The disc "says" to the console to read the ide or serial port DS folder only.

[SWAT]

(Сегодня 02:05)Darkodan писал(а):  By the way, I also realized that I need the DreamShell_bootloader_v2.7 disk to boot Dreamshell v4.0.1. So first I'll have to burn a new disk.

You can use any version of Bootloader to boot any version of DreamShell 4.
SD Cards larger than 64GB are not guaranteed to work over serial port.
Use MBR table for volumes and create primary volume of FAT 32 with biggest cluster size.